Re: Throwout Collar Lube
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Just smear a little bearing grease on the input shaft sleeve. The throwout bearing itself is permanently lubricated. There is no way to access those lube holes once all is assembled. I have actually never seen such.
Posted on: 2022/1/31 13:20
|
|||
|
Re: Throwout Collar Lube
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Thanks!
Posted on: 2022/1/31 19:05
|
|||
|
Re: Throwout Collar Lube
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
So it turns out if you read the Owner's Manual all will be revealed!
Page 17: Clutch Shifter Bearing: The clutch shifter thrust bearing is packed with lubricant and sealed and should not require attention. Should bearing become noisy, a hand oiler with long curved nozzle may be used to reach the well in bearing housing after removing the steel pan at bottom of bell housing. A teaspoonful is sufficient for one oiling. Do not overoil.
Posted on: 2022/12/28 17:27
|
|||
|