Re: 1937 120-C door window metal channel weatherstrip
|
||||
---|---|---|---|---|
Webmaster
|
It should be a felt line channel with a rubber and metal backing that goes in the channel that window slides up and down against.
Posted on: 2023/7/3 21:17
|
|||
-BigKev
1954 Packard Clipper Deluxe Touring Sedan -> Registry | Project Blog 1937 Packard 115-C Convertible Coupe -> Registry | Project Blog |
||||
|
Re: 1937 120-C door window metal channel weatherstrip
|
||||
---|---|---|---|---|
Home away from home
|
Correct on the felt channel which I have. But what I'm speaking of is what the bottom portion of the glass that would then slide into the metal channel (the metal channel that attaches to the up/down roller mechanism). Wondering if it's glass setting tape that gets used to set the glass in or if that weatherstrip is used.
Quote:
Posted on: 2023/7/3 21:36
|
|||
|
Re: 1937 120-C door window metal channel weatherstrip
|
||||
---|---|---|---|---|
Home away from home
|
Here's a better picture of the full window. As shown by my fingers the bottom of the glass is set into the metal channel. But with what? Glass setting tape or weatherstrip. Thanks all in advance.
Quote:
Posted on: 2023/7/3 21:41
|
|||
|
Re: 1937 120-C door window metal channel weatherstrip
|
||||
---|---|---|---|---|
Home away from home
|
I purchased replacement front and rear vent windows from the GLASS MAN and he supplied the setting tape with my order.
I used this tape and it set very well in the channel and a razor blade trimmed off the excess. The nice thing about the tape was the ability to set the window edge to the correct clearance to the frame as they close against it.
Posted on: 2023/7/3 21:48
|
|||
Larry Reber
|
||||
|
Re: 1937 120-C door window metal channel weatherstrip
|
||||
---|---|---|---|---|
Webmaster
|
I had a glass shop replace my glass and they used setting tape.
Posted on: 2023/7/3 22:33
|
|||
-BigKev
1954 Packard Clipper Deluxe Touring Sedan -> Registry | Project Blog 1937 Packard 115-C Convertible Coupe -> Registry | Project Blog |
||||
|
Re: 1937 120-C door window metal channel weatherstrip
|
||||
---|---|---|---|---|
Just can't stay away
|
I used glass setting tape - first coat the tape with kerosine.
Posted on: 2023/7/8 11:16
|
|||
|