Re: 526 light switch removal
|
||||
---|---|---|---|---|
Not too shy to talk
|
Looks a lot like the 7 series, I will tell what I did to get mine apart.
There should be three filister head screws holding the fiber switch board which need to be removed. Then remove the bolt on the back and the cup shaped piece with the switch spider should slide off the end of tube. I can't remember but in may be important to pay attention to the relationship on the switch to the groove in the tube. The pics I attached may be out of sequence, but you can see the relevant things. I also took the opportunity to replace the frayed end of the horn wire. Attach file: IMG_0706.JPG (4,452.45 KB) IMG_0700.JPG (5,387.94 KB) IMG_0709.JPG (4,407.80 KB) IMG_0710.JPG (4,595.79 KB)
Posted on: 1/16 13:57
|
|||
|
Re: 526 light switch removal
|
||||
---|---|---|---|---|
Not too shy to talk
|
Here are a couple more after things are apart, could be dirty contacts, a lot of oil over time can leak down
out of the steering box and make a mess of the sliding contacts
Posted on: 1/16 14:05
|
|||
|
Re: 526 light switch removal
|
||||
---|---|---|---|---|
Home away from home
|
Many thanks.
I wondered if one had to do something with the shaft on the top and the bottom. Bob
Posted on: 1/16 22:43
|
|||
|
Re: 526 light switch removal
|
||||
---|---|---|---|---|
Home away from home
|
Does anyone know if this switch is reproduced ? Mine is missing and I have seen other cars that way too. Doesn't seem like it would be that difficult to reproduce it.
Posted on: 1/17 10:52
|
|||
|