Packard Forum Index » Project Blogs

Tom
Always impressed with your work! But did not realise that is the amount of trouble you have to go to to get that kind of results! LOL!
Your painting looks great. What system are you using and what brand?

Barrie,

Thanks for following along! I'm not doing nearly as complete a job as you are, vis-a-vis the painting. I am only doing the chassis components. For the chassis, I am using an initial two coats of POR-15, followed by 3 coats of Eastwood Chassis Black. I make sure to prep the surface for the POR-15 per the manufacturer's instructions. I also apply the first coat of Chassis Black onto the POR-15 when it is still tacky. I found that if the POR-15 dries to much, the Chassis Black won't stick. I let the part cure for 48 hours before doing anything else to it.

If I do it right, I can hammer on the paint and not mar it. I don't recommend the hammer step.

Tom

Just a quick update, and a quick question. I got the brake drums cleaned up (they had already been machined) and painted. As per Dave's comments, I only applied a single thin coat of primer and a single thin coat of chassis black.

Interestingly, the old paint that remained was quite thick; a fairly thick layer of red primer and a thick layer of black lacquer. I'm pretty sure it was original paint. Admittedly, there weren't a lot of areas left painted.

The plug for the brake light wires that goes to the socket on the transmission was shot (see photos below). Anyone know a good source for such a piece? I looked through Restoration supplies catalog and could not find anything. I couldn't think of another source.

Thanks,

Tom

Attach file:

---

  (16.63 KB)


  (11.94 KB)


  (12.41 KB)


  (11.68 KB)


  (13.20 KB)

It's a long shot, but you might try the folks who make wiring harnesses, like Rhode Island, etc.

Dave,

Great idea. Thanks.

Tom

This last week I got the brakes finally done and the drums reinstalled. Yesterday my brother and I did some bushing installation for the front spring shackles. Unfortunately, that was all the time I had. I am off to Colorado for two weeks of work, so there will be no updates after that.

Here is a video of our efforts:

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/7jSm8VnbmWk&hl=en&fs=1&rel=0"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/7jSm8VnbmWk&hl=en&fs=1&rel=0" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>

YouTube won't let us see the video - claims "This video is private"...

Edit: Works great now...thanks!

I just figured out how to embed the video. Hopefully that will work.

Tom

Tom,

Great video! I need a video on 1934 King pin Replacement. When is will you have that one published?

Tom Laferriere

Dear All,

It has been a very long time since I have updated this blog, but I am now back. My absence has been very frustrating, as it has also meant an absence from my garage! I am hopeful that next week I will be able to restart work on the sedan.

In other news, I have had to move servers for the Packard Paddock website. I have also decided to change the program I have been using to create the website, which meant largely recreating the entire site. I am still in the process of that migration, but I would really like it if folks could give me some feedback on the new look and feel of the site.

The domain transfer to my new registrar has not been completed yet, so for not, to visit the site please go togil.machighway.com/~packardp/. To make things easy, the latest blog entry is about the new site, and you can leave comments there or here.

Thanks tons, and I am REALLY looking forward to spending some quality time amongst Packards and Packard people.

Cheers,

Thomas