Re: gas tank sending unit 48 Custom
|
||||
---|---|---|---|---|
Forum Ambassador
|
Here is a bit from SC Vol 22 #3
Posted on: 5/22 22:22
|
|||
Howard
|
||||
|
Re: gas tank sending unit 48 Custom
|
||||
---|---|---|---|---|
Just can't stay away
|
VERY helpful Howard! Thanks!
Do I read this correctly - is it possible to use the sending unit for the 17 gallon in the 20 gallon tanks on my 2262 as long as I've been the arm correctly?
Posted on: 5/22 22:30
|
|||
Todd W. White
Sapulpa, Okla. 1949 2262 DeLuxe Eight Touring Sedan |
||||
|
Re: gas tank sending unit 48 Custom
|
||||
---|---|---|---|---|
Forum Ambassador
|
Quote:
Since they did go to the expense of stocking two senders there could be an internal difference in the movement range. Another possibility is the ears they caution to not bend when adjusting the float limits the range of the 17 gallon sender so it can only accommodate the height of the smaller tank. We know the amount of float drop on both senders but it would also be interesting to compare the length of the arm from the bend to the float on the two senders (B in the sender photo) and how the Ford unit from Carpenter compares. A longer arm on the 20 gallon sender could keep the swing on the deeper tank in the same range of the smaller senders limit tabs.
Posted on: 5/22 22:50
|
|||
Howard
|
||||
|
Re: gas tank sending unit 48 Custom
|
||||
---|---|---|---|---|
Just can't stay away
|
Thanks again, Howard. Based upon the information you provided, and after measuring my tank and calculating it to be a 20 gallon tank, I now know which sending unit I'm looking for.
Posted on: 5/22 23:16
|
|||
Todd W. White
Sapulpa, Okla. 1949 2262 DeLuxe Eight Touring Sedan |
||||
|