Packard Forum Index » Post-War (1946-54)

Topic: 53 Packard Clipper engine won't turn over

Bottom

Previous Topic

Next Topic Register To Post

« 1 2 (3)

kens53clip

Re: 53 Packard Clipper engine won't turn over

#21

Home away from home

After I re-installed the starter I asked my Father (the man who owned and bought two new, including a 53 Clipper) to try to start the car so I could check the carb switch and key ignition switch with the test light. It was a pleasant surprise when it started. Suddenly no other tests were required.
Ken Dunning
kens53clip

Posted on: 2009/7/8 11:50

Ken
53 Clipper Deluxe 4 Dr.

Project Blog

Owen_Dyneto

Re: 53 Packard Clipper engine won't turn over

#22

Forum Ambassador

Isn't it nice when things go that way! Could happen more often!

Posted on: 2009/7/8 15:44

kens53clip

Re: 53 Packard Clipper engine won't turn over

#23

Home away from home

When I consider the fact that I bought the car in poor condition for bottom dollar on eBay I consider myself very fortunate that I have had as few problems with the car as I have had. I also attribute it to the fact that Packard made a quality car, even with their least expensive models.
Ken Dunning
kens53clip

Posted on: 2009/7/9 12:02

Ken
53 Clipper Deluxe 4 Dr.

Project Blog

Board index » Discussion » Post-War (1946-54) » 53 Packard Clipper engine won't turn over

Top

Previous Topic

Next Topic

« 1 2 (3)

	';
Merry Christmas and welcome to Packard Motor Car Information! If you're new here, please register for a free account.