Re: '32 Packard Turn Signals
|
||||
---|---|---|---|---|
Home away from home
|
Even with electric signals I find myself using these hand signals when someone is following too closely and the system is not nearly as visible as new cars:
Extend the arm for the slow signal and wave the hand to get the followers attention. Upon observing that attention has been achieved raise the arm for the desired signal. I suppose a brightly colored glove would also help. This method seems to work well for me, although if I was wiring my own car I would bite the bullet and install trailer beacons. They may look like hell, but with the right plugs they could be removed for shows.
Posted on: 2011/7/31 9:52
|
|||
|
Re: '32 Packard Turn Signals
|
||||
---|---|---|---|---|
Forum Ambassador
|
Out here it's more likely a driver following someone with their arm out and waving--no matter the sequence or position-- would think the waving driver was under the influence or take the wave for a signal to pass.
Posted on: 2011/7/31 10:10
|
|||
Howard
|
||||
|
Re: '32 Packard Turn Signals
|
||||
---|---|---|---|---|
Home away from home
|
I often find it nessecary to signal other drivers on our roads here in Sydney - but it has nothing to do with turn signals and the signals I use are rarely polite... LOL
Excellent information though - I have been considering this issue for my own current project.
Posted on: 2011/8/1 20:21
|
|||
If at First You Don't Succeed - Skydiving is Not For You...
|
||||
|