|
Re: Replacing Cowl Vent Gasket
|
||||
|---|---|---|---|---|
|
Home away from home
 
|
When I did this job last spring, I used a heat gun to get the old gasket out, followed by a lift steel wool. I did end up painting some bare metal as well, then 3M weatherstrip adhesive. I mentioned it on my 120 blog linked below.
Posted on: 2023/10/8 12:35
|
|||
|
1937 120 1092 - Original survivor for driving and continued preservation. Project blog / Registry
1937 115 1082 - Total basket case, partial restoration, sold Hershey 2015 Project blog / Registry |
||||
|
||||
cowl.jpg (538.05 KB)
|
Re: Replacing Cowl Vent Gasket
|
||||
|---|---|---|---|---|
|
Home away from home
|
Glad it worked out!
Posted on: 2023/10/11 20:16
|
|||
|
1937 120 1092 - Original survivor for driving and continued preservation. Project blog / Registry
1937 115 1082 - Total basket case, partial restoration, sold Hershey 2015 Project blog / Registry |
||||
|
||||
