Re: Ultramatic pan no filler tube
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
ok. So it's studebaker. IIRC Studebaker was always pretty good at landing miltitary contracts. Now why a T'Ultra or any automatic of that vintage would be used for military operations is beyond my comprehension. Most likely it was some boon-doggle stamping for some off-the rail gravey train contract using left over worn out dies.
Posted on: 2011/4/11 9:45
|
|||
VAPOR LOCK demystified: See paragraph SEVEN of PMCC documentaion as listed in post #11 of the following thread:f
https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?topic_id=7245 |
||||
|
Re: Ultramatic pan no filler tube
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Do u have anyother similar parts of obscure nature???
Posted on: 2011/4/11 9:48
|
|||
VAPOR LOCK demystified: See paragraph SEVEN of PMCC documentaion as listed in post #11 of the following thread:f
https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?topic_id=7245 |
||||
|
Re: Ultramatic pan no filler tube
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
My 'puter resolution is not the best in the world. But the color on the pan appears to be a rather lite OD color. But i didn't think the lite OD came along until the late 60's at the earliest. That paint color mite be the closest clue we have rite now.
Posted on: 2011/4/11 9:53
|
|||
VAPOR LOCK demystified: See paragraph SEVEN of PMCC documentaion as listed in post #11 of the following thread:f
https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?topic_id=7245 |
||||
|
Re: Ultramatic pan no filler tube
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
That pan would be GREAT to use as a T'Ultra diagnostics test pan (with some minor mods) as outlined in the 55-56 service manual.
Posted on: 2011/4/11 10:01
|
|||
VAPOR LOCK demystified: See paragraph SEVEN of PMCC documentaion as listed in post #11 of the following thread:f
https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?topic_id=7245 |
||||
|
Re: Ultramatic pan no filler tube
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
A test pan is what I thought it was at first but early pans had a bump out on bottom for port fitting clearance and later ones appeared to use the original pans bolted to the extension--probably to use the dipstick tube to re-fill trans. The extension is the key. I had one welded up from the pictures, used once, but never had an issue fixed. Without it, pan won't do much.
Posted on: 2011/4/11 10:36
|
|||
Howard
|
||||
|
Re: Ultramatic pan no filler tube
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
some pictures of the test pan. obscure parts? probably can find more never did pin down these marine valves
Posted on: 2011/4/11 13:18
|
|||
|