|
Re: Ultramatic pan no filler tube
|
||||
|---|---|---|---|---|
|
Home away from home
 
|
Is that an OD color it is painted???? Maybe for military or somekind of industrial, Ag or limited space use.
Posted on: 2011/4/11 8:45
|
|||
|
VAPOR LOCK demystified: See paragraph SEVEN of PMCC documentaion as listed in post #11 of the following thread:f
https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?topic_id=7245 |
||||
|
||||
|
Re: Ultramatic pan no filler tube
|
||||
|---|---|---|---|---|
|
Forum Ambassador
 
|
Mismarked? Looks like a pan from prior to the adoption of the Gear-start/Twin Ultra (49 thru mid-54) where the filler neck and dipstick were incorporated into the trans body casting and not the pan.
Posted on: 2011/4/11 8:46
|
|||
|
||||
|
Re: Ultramatic pan no filler tube
|
||||
|---|---|---|---|---|
|
Home away from home
|
THat part number is not listed in the 55/56 Parts cataloug.
Posted on: 2011/4/11 8:51
|
|||
|
VAPOR LOCK demystified: See paragraph SEVEN of PMCC documentaion as listed in post #11 of the following thread:f
https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?topic_id=7245 |
||||
|
||||
|
Re: Ultramatic pan no filler tube
|
||||
|---|---|---|---|---|
|
Home away from home
|
Note the cut-out or recess of the flange on the left side of pic. Did PRE 55 or 56 have such a stamped cut-out too??? I don;t know.
Posted on: 2011/4/11 8:54
|
|||
|
VAPOR LOCK demystified: See paragraph SEVEN of PMCC documentaion as listed in post #11 of the following thread:f
https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?topic_id=7245 |
||||
|
||||
|
Re: Ultramatic pan no filler tube
|
||||
|---|---|---|---|---|
|
Home away from home
|
Also note the WIDE spaced bolt holes in rite side flange. 56 only????
Posted on: 2011/4/11 8:55
|
|||
|
VAPOR LOCK demystified: See paragraph SEVEN of PMCC documentaion as listed in post #11 of the following thread:f
https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?topic_id=7245 |
||||
|
||||
|
Re: Ultramatic pan no filler tube
|
||||
|---|---|---|---|---|
|
Home away from home
|
Hash or 56J maybe????
Posted on: 2011/4/11 8:56
|
|||
|
VAPOR LOCK demystified: See paragraph SEVEN of PMCC documentaion as listed in post #11 of the following thread:f
https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?topic_id=7245 |
||||
|
||||
|
Re: Ultramatic pan no filler tube
|
||||
|---|---|---|---|---|
|
Home away from home
|
Let me guess. Do u have a big stack of about 500 of those pans????
Posted on: 2011/4/11 9:04
|
|||
|
VAPOR LOCK demystified: See paragraph SEVEN of PMCC documentaion as listed in post #11 of the following thread:f
https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?topic_id=7245 |
||||
|
||||
|
Re: Ultramatic pan no filler tube
|
||||
|---|---|---|---|---|
|
Home away from home
|
I'm pretty sure my 50 has a cutout on the flange and for sure has the dipstick in the body of the trans, no provision in the pan. I forget what the cutout was for, but i think it was linkage that would be rubbing right there. I thought someone had modded it.
If these are just plain regular ultra pans and you have a stack, they'd be good ones to modify for a normal dipstick setup!
Posted on: 2011/4/11 9:15
|
|||
|
||||
|
Re: Ultramatic pan no filler tube
|
||||
|---|---|---|---|---|
|
Home away from home
|
I realize it is not in the Packard parts book that's why I am asking I do not have 500 but I do have a few. 56J part # is 6480501 American motors is 6471053. It is 56 only 20 bolt holes and has the flat area to install the fill tube for the 56J
Attach file:  (46.72 KB)
Posted on: 2011/4/11 9:19
|
|||
|
||||
