|
Re: 1940 Distributor
|
||||
|---|---|---|---|---|
|
Home away from home
 
|
Maybe try an AL-63
Posted on: 2011/5/6 20:37
|
|||
|
||||
|
Re: 1940 Distributor
|
||||
|---|---|---|---|---|
|
Home away from home
|
Quote:
An old Napa list that I have shows an AL-63 cap for the IGC distributor.
Posted on: 2011/5/6 21:12
|
|||
|
||||
|
Re: 1940 Distributor
|
||||
|---|---|---|---|---|
|
Home away from home
|
Yes, I think the IGW uses the AL-59 and the IGC uses the AL-63.
Posted on: 2011/5/7 15:06
|
|||
|
||||
|
Re: 1940 Distributor
|
||||
|---|---|---|---|---|
|
Home away from home
|
Thanks Guys for the input. I'll try the AL-63 and see how that works out.
Posted on: 2011/5/8 9:36
|
|||
|
||||
(107.64 KB)
|
Re: 1940 Distributor
|
||||
|---|---|---|---|---|
|
Home away from home
|
This info is about ten years old, but my 41 110 used a Napa Echlin AL63 cap, with a AL62 rotor. Breaker was a Napa Echlin C3 763A, and the condensor was a Napa RR 174. The car is long gone, so I don't know if this was for a Delco or Autolite.
Posted on: 2011/5/10 9:34
|
|||
|
||||
|
Re: 1940 Distributor
|
||||
|---|---|---|---|---|
|
Home away from home
|
Thanks everyone for the help.........
As a follow up it was indeed the NAPA parts AL-63 for the Distibutor Cap and AL-62 for the rotor button. Thanks again,
Posted on: 2011/5/13 17:38
|
|||
|
||||
