Packard Forum Index » Post-War (1946-54)

Can somebody please post a picture of where the fuel line should end on a 53 clipper (Engine side). I would like to end the new line and make the flare before putting the engine in there, since it will give me some more room to work. Couldn't find a real good pic online.
I got the repro hose from niagara packards, so the original location and direction of the flare would be a great help.
No real rush on a photo, I won't be back to the car for a week or so.
Tank, rear shocks, and fuel line back in the car. It's a good feeling to be bolting a car back together. Thanks guys, Tobs

There is a clip on the forward passenger side of the engine crossmember, and the fuel line snaps into the clip and bends upward towards the fuel pump and ends within a couple inches of that clip. The rubber hose connects there and completes the journey to the fuel pump.

Here is a pic from my project archive:

Attach file:

---

  (187.41 KB)