Re: disassemble window handles
|
||||
---|---|---|---|---|
Home away from home
|
Check with Jerry at Yesterdaysradio. He has adds in most Packard mags. Dell
Posted on: 2015/5/11 20:15
|
|||
35-1200 touring sedan 42-110 convertible coupe 48-2293 station sedan |
||||
|
Re: disassemble window handles
|
||||
---|---|---|---|---|
Forum Ambassador
|
Originally the ball was pressed onto the shaft. after 75 years, sometimes they come loose. if you can get it the rest of the way off, fine, then reassemble with some epoxy, or push it back on with some epoxy. Shouldn't be any big deal.
Posted on: 2015/5/11 22:16
|
|||
|
Re: disassemble window handles
|
||||
---|---|---|---|---|
Just can't stay away
|
Thanks to all for info. And while I'm here does anyone have the hex head screws part # 5739 they hold the fender & splasher together along the upperside on 15th seeries 120 and others.
Thanks Packard 385
Posted on: 2015/5/13 23:09
|
|||
|
Re: disassemble window handles
|
||||
---|---|---|---|---|
Just can't stay away
|
These should be #10(.190)X32 Hex head ,1/2 long(measured under the hex head)with 7/16 thread length. I have seen many restorations that use 10X32 domed slotted screws instead and don't know any better.
For a source of screws try Tioga Stainless,LLC P.O. Box 565 Burlington,VT 05402 or call 802 -655-9671 They are real honest, good people to deaL with and also come to the fall Hershey.
Posted on: 2015/5/14 11:48
|
|||
|