Re: underdash mount 6V gas gauge
|
||||
---|---|---|---|---|
Forum Ambassador
|
If you mean an aftermarket hang on type gauge there are relatively few 6v gauges anymore.
I would look at Classic Instrumentshttp://shop.classicinstruments.com and see if any of their numerous fuel gauges will work on 6v or Westachhttp://www.westach.com and check out their 6v offerings. Westach is one of the few companies that specifically mention 6v. Any of those aftermarket gauges would most likely also need a sender specific to the gauge. Classic has some adapters to mount their senders into various tanks. IIRC one poster that bought an adapter still had to modify it slightly for a Packard tank. If you mean the indash original type gauge, perhaps flackmaster or Kanter has some NOS gauges. Usually it is the sender that goes out on those and I believe the option would be to have yours rebuilt.
Posted on: 2015/6/2 17:00
|
|||
Howard
|
||||
|
Re: underdash mount 6V gas gauge
|
||||
---|---|---|---|---|
Just popping in
|
thank you, I will ck them out.
I have tested the sending unit and it seems to be working well.
Posted on: 2015/6/2 19:21
|
|||
|