Re: 1939 12; adjust steering box
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
I'm don't know which adjustment your speaking of and don't have my shop manual handy but if you're talking about the cross shaft end play (the most commonly needed adjustment) all you really need is a delicate touch or a fish scale attached to a spoke at the rim and read the force to pull the wheel back and forth thru the center point. Best done with the wheels and tires removed, and DO NOT overtighten or you'll ruin the gear box - aim for about 1-1/2 inches of free play at the rim.
Posted on: 2015/5/24 14:36
|
|||
|
Re: 1939 12; adjust steering box
|
||||
---|---|---|---|---|
Not too shy to talk
![]() ![]() ![]() |
Hello Owen, many thanks for the data. Just what I needed to know. However, my mechanic tells me that in order to do this adjustment, as you stated, a special Packard tool was required. Thoughts?
Richard
Posted on: 2015/5/25 11:11
|
|||
|
Re: 1939 12; adjust steering box
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
I'm not sure what special tool your mechanic is referring to but a detailed description of the steering box adjustment can be found in this service training film supplement from 1937 which would still be applicable to 1939 models.
1937 Film Supplement - Steering
Posted on: 2015/5/25 13:49
|
|||
|
Re: 1939 12; adjust steering box
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
As O_D said, a fish scale is probably what will substitute.
In my previous life we needed a tool to measure how much force it took to move part of a piece of equipment to ensure the brakes were being applied and released evenly. The special tool the manual called for was expensive and not readily available in this country. We found a good quality hanging fish scale did a commendable job. If that is what you need then there are all kinds of quality and working range scales available similar to the one in the photo. Just need to pick one that will work accurately in the range you want to measure. If it is a different tool needed maybe your mechanic could provide more info. Attach file: ![]() ![]()
Posted on: 2015/5/25 14:10
|
|||
Howard
|
||||
|
Re: 1939 12; adjust steering box
|
||||
---|---|---|---|---|
Not too shy to talk
![]() ![]() ![]() |
Thanks, Owen. Very good of you to send me the Service Manual. I'll see if i can get more info on the "Special Tool" and get back to you.
Best, Richard
Posted on: 2015/5/28 11:39
|
|||
|
Re: 1939 12; adjust steering box
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
albo123, if you're going to continue with this vehicle, might I suggest you get yourself a reprint of the 1937-38 Shop Manual. The 39 Twelve has the same gear as the 37-38 Super 8 and Twelve, attached is the page from the shop manual. S.T. 975 is NOT required for the roller mesh adjustment, you can easily do the job without it.
Posted on: 2015/5/28 15:44
|
|||
|