Packard Forum Index » Pre-War (1899-1942)

Looking for an under dash mount 6V gas gauge. 1941 Packard 1900 series. I am never sure if this is the appropriate avenue for posting one's searches.

Thank you

If you mean an aftermarket hang on type gauge there are relatively few 6v gauges anymore.

I would look at Classic Instrumentsshop.classicinstruments.com and see if any of their numerous fuel gauges will work on 6v or Westachwestach.com and check out their 6v offerings. Westach is one of the few companies that specifically mention 6v.

Any of those aftermarket gauges would most likely also need a sender specific to the gauge. Classic has some adapters to mount their senders into various tanks. IIRC one poster that bought an adapter still had to modify it slightly for a Packard tank.

If you mean the indash original type gauge, perhaps flackmaster or Kanter has some NOS gauges. Usually it is the sender that goes out on those and I believe the option would be to have yours rebuilt.

thank you, I will ck them out.
I have tested the sending unit and it seems to be working well.