Re: '37 Wind Wing Installation - Con't
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Steele Rubber would have everything you need in that dept.
https://www.steelerubber.com/search?year=1937&make=packard&model=120&style=4-door-touring
Posted on: 2019/2/13 11:26
|
|||
|
Re: '37 Wind Wing Installation - Con't
|
||||
---|---|---|---|---|
Not too shy to talk
![]() ![]() ![]() |
Usually such glass is installed with glass setting tape. Once the glass is in place with the tape on it, the tape is oiled and expands to hold the glass.
Posted on: 2019/2/13 12:11
|
|||
|
Re: '37 Wind Wing Installation - Con't
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
I had to replace the passenger side wind wing window on my 37 Six. Went to a local glass shop and had a new window cut, based on the cracked one I took out. They gave me a length of tape. I wrapped the tape on the outside edges of the window and carefully pressed the new glass into the frame. Excess tape can be trimmed if too much shows. A satisfying repair.
Posted on: 2019/2/13 14:32
|
|||
We move toward
And make happen What occupies our mind... (W. Scherer) |
||||
|
Re: '37 Wind Wing Installation - Con't
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
My thanks to you all. I do need some more items from Steele Rubber, so I shall check with them. Again, thanks.
Posted on: 2019/2/13 14:53
|
|||
Roger Howe
Whitewright, TX 1937 120C Touring Sedan |
||||
|