Re: Brake shoe lining width difference
|
||||
---|---|---|---|---|
Forum Ambassador
|
To compensate for the effect of the movement allowed by the trunnion block on the braking geometry. The narrower lining on the front left is particular to models with the trunnion hlock.
Posted on: 7/26 20:52
|
|||
|
Re: Brake shoe lining width difference
|
||||
---|---|---|---|---|
Home away from home
|
Quote:
Can you elaborate a bit on what a trunion block is and why it would cause this effect?
Posted on: 7/26 21:32
|
|||
1955 400 | Registry | Project Blog
1955 Clipper Deluxe | Registry | Project Blog 1955 Clipper Super Panama | Registry |
||||
|
Re: Brake shoe lining width difference
|
||||
---|---|---|---|---|
Home away from home
|
Quote:
That's probably the most counterintuitive answer I ever heard
Posted on: Yesterday 10:52
|
|||
|
Re: Brake shoe lining width difference
|
||||
---|---|---|---|---|
Home away from home
|
I believe the trunnion block was part of a "kick shackle" arrangement designed to reduce road shock transmitted to the steering wheel when the front wheels hit a bump. It allowed the left front spring to move backward slightly when a bump was encountered.
Posted on: Yesterday 12:02
|
|||
|
Re: Brake shoe lining width difference
|
||||
---|---|---|---|---|
Forum Ambassador
|
For an illustration of the trunnion block see the lower left corner of this page from the 6th Series Mechanical Features brochure. The trunnion was discontinued on the Senior cars after 1936 with the adoption of independent front suspension and hydraulic brakes for the 15th Series.
Posted on: Yesterday 14:41
|
|||
|
Re: Brake shoe lining width difference
|
||||
---|---|---|---|---|
Home away from home
|
Interesting. What's the reason in particular for left front for this feature?
Posted on: Today 5:25
|
|||
1955 400 | Registry | Project Blog
1955 Clipper Deluxe | Registry | Project Blog 1955 Clipper Super Panama | Registry |
||||
|
Re: Brake shoe lining width difference
|
||||
---|---|---|---|---|
Home away from home
|
I think the left side location was due to the steering drag link being on that side. The device reduced road shock transmitted to the steering wheel and probably reduced bump steer in some situations. Some Dodge and Chrysler cars used a related device. The front suspensions on many 1960s cars had a lot of compliance built into them, and many cars used a "torque box" frame to add even more "give". This gave a very smooth ride at some cost in handling precision.
Posted on: Today 7:02
|
|||
|