|
Re: 1948 License Plate Light
|
||||
|---|---|---|---|---|
|
Home away from home
 
|
My 47 has the same license plate lite as your 48. The two straight slot screwes hold on the bezel, glass and gasket. The metal housing is retained to the gravel pan by two nuts. These nuts must be removed, to remove the housing, dont forget to disconnect the wire at the Wade connector.
Posted on: 2012/12/2 21:14
|
|||
|
||||
|
Re: 1948 License Plate Light
|
||||
|---|---|---|---|---|
|
Home away from home
|
Thanks Dallas - I guess the two nuts are on the underside of the bumper. The former owner used glue and silicone around the gasket- I will see if I can remove the two nuts . I'm sure I will need a new gasket. Thanks again
Posted on: 2012/12/3 1:32
|
|||
|
||||
