VIN Plate Decode
|
||||
---|---|---|---|---|
Quite a regular
|
Was looking at a Packard for sale here locally and found the VIN plate interesting:
5562 = Custom Trim = 22 But looking through the : packardinfo.com/xoops/html/downloads/1955_2_Upholstery.pdf It looks like this trim was on the Super not the custom. And I thought the point of the Custom was the upgraded interior. Thoughts?
Posted on: 2012/8/21 20:53
|
|||
|
Re: VIN Plate Decode
|
||||
---|---|---|---|---|
Home away from home
|
I remain suspicious of any VIN tag that is affixed with pop rivets. What number does the vehicle's block have ?
Posted on: 2012/8/25 0:20
|
|||
|
Re: VIN Plate Decode
|
||||
---|---|---|---|---|
Forum Ambassador
|
Keen observation, Kevin!
Posted on: 2012/8/25 9:15
|
|||
|
Re: VIN Plate Decode
|
||||
---|---|---|---|---|
Home away from home
|
Thanks Owen. Just today I drove an original 1956 Clipper deluxe here in Tucson. The attached picture shows the untouched VIN plate without rivets or screws for 55-56's. My counsel for fellows in the hobby is to always seek answers if there are indicators that something has been changed. If thereafter a reasonable explanation is encountered, one can then move on with a better understanding of the auto's lineage.
The VIN plate on the 5587 is from another original car; albeit from a junk yard here in southern Arizona and again without rivets and screws.
Posted on: 2012/8/28 17:34
|
|||
|
Re: VIN Plate Decode
|
||||
---|---|---|---|---|
Forum Ambassador
|
Even though the ID plate in question may or may not be original to the car, it does not appear to be altered (or if so, was a superb job) so the question still remains.
5562 is a Custom. Paint ED is listed as available on Customs but nylon upholstery trim code 22 is listed as available on Supers only. The Custom would have had a different higher quality fabric -- code 42 in that color combination. Either the literature is incorrect or they allowed a downgrade option.
Posted on: 2012/8/28 18:07
|
|||
Howard
|
||||
|
Re: VIN Plate Decode
|
||||
---|---|---|---|---|
Home away from home
|
I don't believe it was altered either. In fact I have not seen a 1955-56 tag that has been altered. So the mystery remains about the trim code. Typo on the machine operators part who was punching out the tags?
Posted on: 2012/8/28 21:37
|
|||
|
Re: VIN Plate Decode
|
||||
---|---|---|---|---|
Home away from home
|
I concur that the VIN plate appears genuine; however what about the rivets? If the rivets are to hold the VIN to the door jam, then it stands to reason that the plate POSSIBLY was not intended for the car in question if a switch took place somewhere in the past.
Also, as the cars left the factory in 55-56, how would a typical VIN plate been affixed to the door jam? Is it the same as pictured above? To OD, anti-theft number documentation would have been great information source had it survived.
Posted on: 2012/8/29 16:05
|
|||
|
Re: VIN Plate Decode
|
||||
---|---|---|---|---|
Forum Ambassador
|
All good points and questions. AFAIK, all 55-6 plates were adhered with the spot welds on either side of the holes as your later pictures show.
The interesting thing about that plate in question whether it belongs on that car or not is the factory stamped numbers. 5562=Custom 22=nylon upholstery in a plainer and different pattern supposedly only available on Supers.
Posted on: 2012/8/29 16:23
|
|||
Howard
|
||||
|
Re: VIN Plate Decode
|
||||
---|---|---|---|---|
Quite a regular
|
Here is the Craigslist ad for the Clipper.
phoenix.craigslist.org/evl/cto/3188051295.html I don't recall the interior well, the car was full to the brim with old parts and computers! Plus it was 115 out so I didn't spend much time investigating. It wasn't till I got home and looked up the interior pattern from the picture that I realized the difference.
Posted on: 2012/8/29 18:11
|
|||
|