Re: 352 Freeze Plugs (Block plugs)
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
You can buy those easily at any auto parts store. They are 1 3/4 inch.
Posted on: 2013/3/24 10:46
|
|||
|
Re: 352 Freeze Plugs (Block plugs)
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Quote:
You can buy those easily at any auto parts store. They are 1 3/4 inch. IIRC, the common 1-3/4" soft plugs are not the correct ones for the Packard V8. They're too small and too deep. Packard V8s require a less-common-but-still-available 1-49/64" shallow soft plug. They're still in the book, both in plated steel and in brass. I just bought a box full last week. jack vines
Posted on: 2013/3/24 11:19
|
|||
|
Re: 352 Freeze Plugs (Block plugs)
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Thanks Ross and JV. Just out of curisoity how thick is the metal in the deep 1-3/4 plug compared to the correct shallow 1-49/64 plug????? I don;t have any to measure.
My guess is that the shallow plug is probably thicker metal than the deep plug. Thicknesses of each plug compared to OEM plug thickness. The only reason i bring up metal thickness is for longevity of the plug life relative to rusting thru.
Posted on: 2013/3/24 13:22
|
|||
VAPOR LOCK demystified: See paragraph SEVEN of PMCC documentaion as listed in post #11 of the following thread:f
https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?topic_id=7245 |
||||
|
Re: 352 Freeze Plugs (Block plugs)
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
also,
there are 1 3/4 stainless steel plugs,,, not deep, I have set for my block,,
Posted on: 2013/3/24 22:01
|
|||
Riki
|
||||
|
Re: 352 Freeze Plugs (Block plugs)
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Thanks for the info folks. Packardinfo comes through again!
Posted on: 2013/3/25 13:43
|
|||
|
Re: 352 Freeze Plugs (Block plugs)
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Quote:
Thanks Ross and JV. Just out of curisoity how thick is the metal in the deep 1-3/4 plug compared to the correct shallow 1-49/64 plug????? I don;t have any to measure. jack vines
Posted on: 2013/3/25 16:59
|
|||
|
Re: 352 Freeze Plugs (Block plugs)
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
I got the Freeze Plugs in from my supplier.
They are Dorman Part # 565-036 Size 1 49/64" Cup Expansion Plug (Freeze Plug) Thanks everyone!
Posted on: 2013/3/29 16:11
|
|||
|
Re: 352 Freeze Plugs (Block plugs)
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Okay, so I found one of the original block plugs I popped out about a year ago, and am comparing it to the replacement one. The OD is correct. But the thickness of the original is almost twice as deep compared to the replacement.
Are the shallow plugs what should be in the block? Are the thicker plugs incorrect that someone put in years ago?
Posted on: 2013/4/14 17:21
|
|||
|
Re: 352 Freeze Plugs (Block plugs)
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
Aftermarket generic replacement parts often aren't an exact match for an OEM part sourced a half-century ago. But the important functional dimension is correct so go for it.
Posted on: 2013/4/14 17:39
|
|||
|