Re: 1948 Deluxe rear window
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
I meant to say - Left Rear Window
Posted on: 2013/3/30 17:21
|
|||
|
Re: 1948 Deluxe rear window
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
The pushbutton rod should be attached at the lock pivot end. If the window frame is off, you should be able to get a piece of tie wire or coat hanger wire and fish down to find the rod to pull it back up where you can reach it. Maybe even a telescoping magnet or one mounted on end of flex rod.
If the frame is still on, same process but will be much more difficult since you will have to maneuver the wire in close quarters between the frame and window and then avoid having the rod want to go on the wrong side of window. A telescoping magnet MIGHT be able to be used in that situation thru the hole. Once the wire is up and if frame is on you will have to try and grasp with needlenose pliers or forceps thru the hole.
Posted on: 2013/3/30 17:44
|
|||
Howard
|
||||
|
Re: 1948 Deluxe rear window
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
The frame is not Off
Posted on: 2013/3/30 18:11
|
|||
|
Re: 1948 Deluxe rear window
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
I need to unlock the door some way
Posted on: 2013/3/30 18:13
|
|||
|
Re: 1948 Deluxe rear window
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
I have the panel part way off in front - I can see bottom of inside door - I dont see the pushbutton rod
Posted on: 2013/3/30 18:20
|
|||
|
Re: 1948 Deluxe rear window
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Have you got an inspection camera available to you? Brand name - Rigid See Snake. Or another way to call it, a bore scope. You might be able to get it through the lock hole and look around to see where you can hook on to something to unlock the door. Just my
![]()
Posted on: 2013/3/30 18:22
|
|||
|
Re: 1948 Deluxe rear window
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
I think your best bet would be to get a telescoping magnet whose magnet will fit thru the hole and see if you can insert it thru the lock hole -- or if the frame is out thru that crack -- and feel around to find the rod. Harbor Freight and many parts stores should have something similar to these shown.
Unless something is really wrong with your car the rod is attached to the lock side pivot via a keeper so should still be attached and just flopped down. Once you can get it in position, should be able to grab with needlenose piers to release the lock.
Posted on: 2013/3/30 18:41
|
|||
Howard
|
||||
|
Re: 1948 Deluxe rear window
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
I think what you are telling me is - the pushbutton rod cannot be accessed by reaching inside the door from the bottom. Can the door be unlocked by reaching inside ? or only by the pushbutton rod ?
Posted on: 2013/3/30 18:54
|
|||
|
Re: 1948 Deluxe rear window
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
The latch is high so don't think you can reach it unless the door panel is totally off--even then it would be fairly hard unless the door was open. The dropped rod itself I believe is on a pivot mechanism in the front with another rod going to the latch. Here is a photo from the parts book of a 23rd series which I THINK would be like yours.
Unlike the fronts, the rear latch is an early version of child proof. I don't know of any way it can be opened except by pulling the rod up so it releases the blocking mechanism.
Posted on: 2013/3/30 19:07
|
|||
Howard
|
||||
|