Re: 1955 Clipper Constellation power steering issue
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
I know the 56th series is varied, but through personal observation thought the lines were kept separate in 55???
Posted on: 2012/7/12 11:28
|
|||
|
Re: 1955 Clipper Constellation power steering issue
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
i'm the exception.
Posted on: 2012/7/12 11:30
|
|||
1937 Packard 138-CD Deluxe Touring Limousine
Maroon/Black 1090-1021 [url=https://packardinfo.com/xoops/html/modules/registry/View.php?ID=232]1955 Packard |
||||
|
Re: 1955 Clipper Constellation power steering issue
|
||||
---|---|---|---|---|
Just popping in
![]() ![]() ![]() |
Thanks for all the information. I have been wondering if this was installed correctly or if it was original. I'm thinking the backwards theory is what probably happened. I'll get under there again and look it over better.
Posted on: 2012/7/12 14:30
|
|||
|
Re: 1955 Clipper Constellation power steering issue
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
I'm an oddball too. My 400 is equipped with a Monroe ps ram. Always thought seniors had Bendix. Hard to explain unless we be sharing a six pack.
Posted on: 2012/7/12 18:00
|
|||
|
Re: 1955 Clipper Constellation power steering issue
|
||||
---|---|---|---|---|
Just popping in
![]() ![]() ![]() |
I got it turned around and back on the correct way. Now I think someone cobbled on some pieces to make the hoses fit. From the diagram posted here, I'm thinking that there is just one hose that connects the two parts.
Posted on: 2012/7/12 18:07
|
|||
|
Re: 1955 Clipper Constellation power steering issue
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
My bendix does not have that metal line. I suggest reading my blog, I have detailed pics of a rebuild of the bendix unit. See my sig for my project blog. Henry's 55 constellation.
Posted on: 2012/7/12 18:38
|
|||
1937 Packard 138-CD Deluxe Touring Limousine
Maroon/Black 1090-1021 [url=https://packardinfo.com/xoops/html/modules/registry/View.php?ID=232]1955 Packard |
||||
|
Re: 1955 Clipper Constellation power steering issue
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
I'm thinking that there is just one hose that connects the two parts.
Not sure exactly what you mean -- just one hose. There has to be two high pressure hoses between the cylinder and control valve - one to apply power in the appropriate direction while the other acts as a return and then another pressure and return between pump and control valve. On Packards version, the two short ones on top of control valve go to cylinder and the two long ones off the side are pressure and return to pump. One of your first photos looked like the two going to cylinder are on opposite sides (top and bottom) of the control valve with the two to pump being the ones on side with the tie rod interference.
Posted on: 2012/7/12 18:52
|
|||
Howard
|
||||
|
Re: 1955 Clipper Constellation power steering issue
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
Quote:
I got it turned around and back on the correct way. This latest pic doesn't show correct orientation of the control valve. Quote: Now I think someone cobbled on some pieces to make the hoses fit. Neither of the hoses from the control valve to the power cylinder shown in your pix are OE or even correct service replacements. The work is just another example of a "Kluge job". Quote: From the diagram posted here, I'm thinking that there is just one hose that connects the two parts. You better take another look at the illustration that HH56 provided - straight from the factory parts book. Two hoses are required from the control valve to the power cylinder. How else would a hydraulic cylinder be able to move in two directions?
Posted on: 2012/7/12 18:57
|
|||
|
Re: 1955 Clipper Constellation power steering issue
|
||||
---|---|---|---|---|
Just popping in
![]() ![]() ![]() |
Sorry for the confusion. The picture was a before pic. I was questioning the metal tubing as not being original. I do realize that all the hoses need to be connected, but wasn't sure about the tubing. With this tubing, I don't see how the hoses can be connected. I was thinking this was added to make the everything fit the wrong way.
Again, thanks for the info.
Posted on: 2012/7/12 20:23
|
|||
|