Re: Now for today's problem......
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
That sounds like a small vacuum leak somewhere. Try turning the idle screws out a little bit (record the amount). If the problem gets better then start plugging vacuum lines, although it could be inside the carburetor as well. Sometimes the choke pistons wear and suck vacuum. It could also be the vacuum advance as the ports are uncovered at light throttle.
Posted on: 2012/9/7 20:31
|
|||
|
Re: Now for today's problem......
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Pat
Vacuum leaks can also occur in and out of the fuel pump, and also at any fittings connected to the intake manifold. Ask me how I know... Regards John Harley
Posted on: 2012/9/7 20:49
|
|||
|
Re: Now for today's problem......
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Quote:
Ask me how I know... Yyyyeeeeeessssss?
Posted on: 2012/9/9 15:25
|
|||
When two men ride the same horse, one has to be in the back...
|
||||
|
Re: Now for today's problem......
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Today we found the vacuum leak, which turned out to be a hose which had slipped off of the washer unit.
Mechanic then fine tuned carb settings and it runs like the gracious lady she can be. I should add that we did plugs/points just because. She starts on a twist of the key and seems to be more powerful while using somewhat less gas. I'll report back if this holds up in practice. At the current cost of petrol, better mileage is a good thing.
Posted on: 2012/9/13 23:08
|
|||
When two men ride the same horse, one has to be in the back...
|
||||
|
Re: Now for today's problem......
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
Please tell me that you replaced the negative lead with a braided strap as they did originally--
Posted on: 2012/9/14 9:22
|
|||
|
Re: Now for today's problem......
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
The fix is a short starter cable, under plastice.....
Posted on: 2012/9/17 20:26
|
|||
When two men ride the same horse, one has to be in the back...
|
||||
|
Re: Now for today's problem......
|
||||
---|---|---|---|---|
Not too shy to talk
![]() ![]() ![]() |
I just had to reply to this post..I am also having this type of summer
![]() ![]() ![]()
Posted on: 2012/9/18 16:26
|
|||
|
Re: Now for today's problem......
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
FWIW I keep one in my spares along with a water pump and other stuff......
Posted on: 2012/9/18 19:35
|
|||
When two men ride the same horse, one has to be in the back...
|
||||
|
Re: Now for today's problem......
|
||||
---|---|---|---|---|
Not too shy to talk
![]() ![]() ![]() |
I love this site!!! I bought a fuel pump using the #6866 number, which fits a Chrysler 318 early 70s from Advance auto parts for 20.00 bolted in on and drove it today...The arm looked different but worked like a charm...Thanks guys
![]()
Posted on: 2012/9/19 22:49
|
|||
|