Re: 1938 Packard 120 brightwork
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
On my 38 120 coupe the strip is one piece about 1 1/2 " wide and goes from the rear edge of the running board to about 1 1/2 " from the front of the fender wheel cut out.
Posted on: 2013/4/16 8:10
|
|||
1938 1601 Club Coupe
|
||||
|
Re: 1938 Packard 120 brightwork
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
aren't these roll formed stainless rather than chrome plated?
Posted on: 2013/4/16 8:10
|
|||
|
Re: 1938 Packard 120 brightwork
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
Yes, stainless steel and not chromium plated. Many of the running board moldings are available from Northfield Forming and that's the first place I'd check to see if they have it.
Posted on: 2013/4/16 8:15
|
|||
|
Re: 1938 Packard 120 brightwork
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Also available from Max Merritt.
They are SS. Tom
Posted on: 2013/4/16 11:48
|
|||
|