Re: Best head gasket for the 352?
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
I purchased mine on ebay 3 1/2 years ago, no problems yet. It was the "Best Gasket" sold by various sellers. I purchased the full set but see you can get just the head gaskets.
Posted on: 2015/1/27 19:18
|
|||
|
Re: Best head gasket for the 352?
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
You could check with Olsons Gaskets for a NOS.
Posted on: 2015/1/27 19:41
|
|||
|
Re: Best head gasket for the 352?
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
The only new head gaskets available are the composition version from Best. They work fine.
I've got a shelf full of the original steel shim gaskets and they also work fine. If anyone needs the steel shim gaskets, let me know. The first on-line place I checked wants $65 a pair. I'll go half that, $32.50. In fact, if you find a lower price, I'll go half that, as long as supply lasts. BTW, anyone building a big bore 374", I've got the world's only known supply of 4.250" bore gaskets. jack vines
Posted on: 2015/1/27 21:14
|
|||
|
Re: Best head gasket for the 352?
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
Jack, a couple of years ago when I rebuilt my 374 I ordered my gasket set from max merritt. It not only has metal head gaskets but also metal intake manifold gaskets. Are you sure Max no longer has the metal?
Posted on: 2015/1/27 23:39
|
|||
1937 Packard 138-CD Deluxe Touring Limousine
Maroon/Black 1090-1021 [url=https://packardinfo.com/xoops/html/modules/registry/View.php?ID=232]1955 Packard |
||||
|
Re: Best head gasket for the 352?
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Quote:
The only new head gaskets available are the composition version from Best. They work fine. Sorry I wasn't crystal-clear. Yes, some vendors would still have old stock 352" steel shim gaskets on the shelves. As I stated, I've got several old stock myself. What I meant to be understood was AFAIK the only new production gaskets are the Best composition. The steel shim aren't in current production, but I'm willing to be corrected if someone has a link to the manufacturer. jack vines
Posted on: 2015/1/28 11:59
|
|||
|
Re: Best head gasket for the 352?
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
several years ago I used composite head gaskets on a 56 clipper 352. I was careful to torque them to specs and after a couple of hundred miles I re-torqued them again.
At about 500 miles, the passenger side blew out. Maybe it was bad luck but I replaced both gaskets with metal and have no problem since. I will not use composite again.
Posted on: 2015/1/28 13:05
|
|||
|
Re: Best head gasket for the 352?
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Personally, I prefer the steel shim gaskets, but they require careful installation.
I mill the surfaces of both the heads and the block decks, tap all head bolt holes, used hardened washers under the head bolts and spray the gaskets with CopperCoat. The composite gaskets from Best are more idiot-proof and if retorqued once after a few heat cycles, I've had no problems using them. They also slightly lower the compression ratio; not a bad thing on '56s using today's gas. jack vines
Posted on: 2015/1/29 9:01
|
|||
|