Packard engine bearings on Ebay
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Anyone had any luck with this guy on Ebay for bearings?
http://www.ebay.com/itm/141308389639?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT I haven't found 0.010 over main bearings yet with my local sources. I've asked him who makes his bearings, but haven't heard back yet.
Posted on: 2015/4/30 21:07
|
|||
1937 120 1092 - Original survivor for driving and continued preservation. Project blog / Registry
1937 115 1082 - Total basket case, partial restoration, sold Hershey 2015 Project blog / Registry |
||||
|
Re: Packard engine bearings on Ebay
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Ken, keep in mind that you will need unfinished main bearings if you are going to line bore. The standard undersized bearings are precision made for specific journal resizing (i.e., -.010"). Your machinist can best advise you on this.
(o{}o)
Posted on: 2015/4/30 21:26
|
|||
We move toward
And make happen What occupies our mind... (W. Scherer) |
||||
|
Re: Packard engine bearings on Ebay
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Based on advice from David Flack, I was not planning on line boring, but I will check with the machinist first.
Posted on: 2015/4/30 21:45
|
|||
1937 120 1092 - Original survivor for driving and continued preservation. Project blog / Registry
1937 115 1082 - Total basket case, partial restoration, sold Hershey 2015 Project blog / Registry |
||||
|
Re: Packard engine bearings on Ebay
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
Best source for main bearing may be Kanter but I'd think the 0.010" oversize will be the hardest to find as they have probably been in the highest demand. 0.020" or 0.030 will probably be easier to find.
Posted on: 2015/4/30 22:25
|
|||
|
Re: Packard engine bearings on Ebay
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
The seller on eBay I understand is Kanter.
I spoke with Feltz Terrill today, he has .010 main bearings in stock, no problemo. Also to confirm, I do have .010 rods for you, for sure, thin shell version as discussed.
Posted on: 2015/4/30 23:00
|
|||
|
Re: Packard engine bearings on Ebay
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Just to clear up a misnomer. Carmarket Pro is not part of Kanter Auto. But I did check on the bearings that you were interested in and we have them in stock in std, .001, .002,
.010, .020, .030, and .040 Thanks James From Kanter Auto
Posted on: 2015/5/1 11:26
|
|||
|
Re: Packard engine bearings on Ebay
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Main bearings located, along with pistons, wrist pins, con rod spacers, rings, and cam bearings. Thanks to all for your help.
Posted on: 2015/5/1 18:21
|
|||
1937 120 1092 - Original survivor for driving and continued preservation. Project blog / Registry
1937 115 1082 - Total basket case, partial restoration, sold Hershey 2015 Project blog / Registry |
||||
|
Re: Packard engine bearings on Ebay
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Great news. Glad to hear it. Give us a report on the the individual parts when they arrive.
Posted on: 2015/5/2 10:20
|
|||
VAPOR LOCK demystified: See paragraph SEVEN of PMCC documentaion as listed in post #11 of the following thread:f
https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?topic_id=7245 |
||||
|