Re: 1953 Packard Clipper
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Most donor engines also need rebuilding at this late date, tho a good 288 is not too tough to find.
How bad is yours? An in-chassis ring and valve job will do wonders for not too many bucks.
Posted on: 2015/7/8 14:59
|
|||
|
Re: 1953 Packard Clipper
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
I fully agree with Ross. Assuming the crank journals and in good condition and the bores are not excessively tapered (beyond 0.007" +/-) you can easily do what we used to call a "semi" rebuild without removing the engine. Properly done you might expect 30,000 or more miles from such a job which for many of us could be 10-20 years of pleasurable driving. Why not do a little diagnosis and see what the needs really are before jumping into a swap?
Posted on: 2015/7/8 15:24
|
|||
|
Re: 1953 Packard Clipper
|
||||
---|---|---|---|---|
Not too shy to talk
![]() ![]() ![]() |
I believe the engine bearing is out and who knows what else. A mechanic I am certainly not, but need to get a Packard guy to stop over to my house and have a beer and dish some advice. As I understand it, total rebuilds are quite expensive, so I am trying to think outside the box as I really like the car. I have attached some pics so you can see. Any assistance is greatly appreciated!
Posted on: 2015/7/8 16:57
|
|||
|
Re: 1953 Packard Clipper
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Hi
Nice-looking Clipper Special, you've come to the right place for knowledgeable help and accurate advice. If an engine bearing it out, does the oil light stay lit indicating low oil pressure? If it's making ominous sounds, can you make a video of it running in a quiet area so those familiar can give your a better idea of what problems you're facing? Ross is extremely familiar with this series, listen to him! Owen gives great advice as well, a partial rebuild might be all it needs. Steve
Posted on: 2015/7/9 17:17
|
|||
.....epigram time.....
Proud 1953 Clipper Deluxe owner. Thinking about my next Packard, want a Clipper Deluxe Eight, manual shift with overdrive. |
||||
|
Re: 1953 Packard Clipper
|
||||
---|---|---|---|---|
Not too shy to talk
![]() ![]() ![]() |
Thanks. I will do that when I get time. For now, Big Blue is back in the garage taking a little nap. Oil light was never lit (assuming not working). Temp gage always seemed to be right in middle. After initial discovery of very low oil was found and filled, the car then would not get up to speed. I could get it into 3rd but it was not going like it should. As I decided to turn around, it died, and thus had it towed to my mechanic. Once there was able to start and fuel pressure and spark tested fine, but they otherwise diagnosed main engine bearing out and an engine rebuild. Not certain how they arrived at that, but from a trustworthy place albeit not one that specializes in 53 Packard Clippers.
Posted on: 2015/7/9 20:58
|
|||
|
Re: 1953 Packard Clipper
|
||||
---|---|---|---|---|
Not too shy to talk
![]() ![]() ![]() |
An old car enthusiast stopped by my garage sale today and of course inquired about my 53 Packard Clipper which has been setting in my garage since last July. I explained my engine issues (mechanic suggested i need a complete engine rebuild) and so he asked me to start it up. It fired right up so we went for a ride around the block. He suggested i could put 50 weight oil in and the main bearing noise would likely go away plus could drive around town for years without hurting it. Any reaction to this?
Posted on: 2016/6/4 17:19
|
|||
|
Re: 1953 Packard Clipper
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Drive for years?
Yes. Or no. Time sufficient to find another engine or acquire parts? Yes.
Posted on: 2016/6/4 18:48
|
|||
|