Re: Motor/transmission removal and reinstall, 48 coupe
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
I checked with Les Schwab Tires, an excellent place to take old cars, and they said you can't use bias tubes with radial tires. It has to do with the construction of the tubes and perhaps the chance of chaffing because radials flex more. Whatever it is, their warranty (which is very comprehensive) requires that radial tubes be used with radial tires. However, radial tubes may also be used with bias tires.
Radial tires make driving my Packard so much easier, especially on poorly paved roads. I ordered Black Diamond radials with the extra wide white wall (special order, takes a few weeks more) here: http://www.dbtires.com
Posted on: 2017/1/3 13:51
|
|||
|
Re: Motor/transmission removal and reinstall, 48 coupe
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
....they said you can't use bias tubes with radial tires
They are correct, sound advice!
Posted on: 2017/1/3 16:32
|
|||
|
Re: Motor/transmission removal and reinstall, 48 coupe
|
||||
---|---|---|---|---|
Quite a regular
![]() ![]() ![]() |
Parts from "Then and Now" showed up, including those studs, radiator hoses, fuel hose to fuel pump (all correct), fuel pump and carb kits (look correct), pan and manifold gaskets.
Wife came down with a medical issue we will be dealing with full time for a while, so it'll be a bit before I get to assemble this pile of stuff.
Posted on: 2017/1/5 12:38
|
|||
|
Re: Motor/transmission removal and reinstall, 48 coupe
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Sorry to hear about your wife, good plan for now.
Wes
Posted on: 2017/1/9 12:39
|
|||
|
Re: Motor/transmission removal and reinstall, 48 coupe
|
||||
---|---|---|---|---|
Quite a regular
![]() ![]() ![]() |
Back on track again. My wife is doing fine, I don't have to be full time caretaker now so I get to slip off and mess with the Packard from time to time.
Was cleaning it up to paint and for some reason put a wrench on it and turned it over - opps - wouldn't go all the way. Pulled the head and it appears thatsome of the heavy carbon build up worked loose and was stopping one or two pistons from going over the top. Cleaned it all out, found there were standard pistons with nearly no ring ridge, which is consistant with the 29K miles we thought was on it. That and the timing chain with no play at all says it is as we thought. Got it back together this afternoon and painted it. Looking good. I do have a question. Pictured is the serial number. Is there any significance to the "CE" at the end of the motor number?
Posted on: 2017/1/29 19:05
|
|||
|
Re: Motor/transmission removal and reinstall, 48 coupe
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
CE means your engine has some differences from engines shipped at the start of assembly or when the original specs were published.
Posted on: 2017/1/29 19:13
|
|||
Howard
|
||||
|
Re: Motor/transmission removal and reinstall, 48 coupe
|
||||
---|---|---|---|---|
Quite a regular
![]() ![]() ![]() |
Thanks. This sounds like a good thing.
I've got to get serious now and get the Packard together. I bought a guys micro cars and a truck load of parts - my shop is going to get real full real quick!
Posted on: 2017/1/29 21:17
|
|||
|