|
Forum Ambassador
 
|
They are both among the first places I would contact for piston availability info.
Egge's website says for info email to info@egge.com For Kanter, you can email the Packard parts department directly at stu@kanter.com
Posted on: 2017/4/29 8:02
|
|||
|
||||
|
Home away from home
 
|
If neither of those vendors have any pistons, you could always have aftermarket forged pistons made. For my 56 V-8, I sent an old piston to Ross Pistons and they made a set of 8 in the bore size I wanted. Here's a link to their website:
rosspistons.com/ Craig
Posted on: 2017/4/29 9:19
|
|||
|
Nuke them from orbit, it's the only way to be sure! Ellen Ripley "Aliens"
Time flies like an arrow. Frui |
||||
|
||||
|
Home away from home
|
I have two new stds. and a set of very good 0.60 over. The used set came out of my 526 convertible coupe as I had to replace a cracked block that was not repairable. My new block was very rusty and would not clean up at 0.60 over so I sleeved it back to standard. I also have one rebabbeded (sp) rod.
Posted on: 2017/4/29 16:14
|
|||
|
35-1200 touring sedan 42-110 convertible coupe 48-2293 station sedan |
||||
|
||||
|
Home away from home
|
IMO, now-days coast to coast phone calls are free.....Why not just call them and be proactive?
Posted on: 2017/4/30 13:23
|
|||
|
Steve
Old cars are my passion  1951 Packard 200 1953 Packard Clipper Custom Touring Sedan 1955 Dodge Custom Royal Lancer Tri-tone 1966 Rambler Classic 770 Convertible |
||||
|
||||
|
Forum Ambassador
|
Isn't the OP in Spain?
Posted on: 2017/4/30 13:40
|
|||
|
||||
|
Not too shy to talk
|
Its not easy for me to speak in english. I can read/write in english but my speaking/listening are bad.
Thats the reason I dont phone to the suppliers 
Posted on: 2017/5/1 3:09
|
|||
|
||||
|
Home away from home
|
jesus68 my bad......I didn't notice you are in Spain. My suggestion was not to be taken as flippant, rather, I thought you could get information faster by a phone call. Sorry.
I hope you find your pistons. Regards, Stefe
Posted on: 2017/5/1 12:37
|
|||
|
Steve
Old cars are my passion 1951 Packard 200 1953 Packard Clipper Custom Touring Sedan 1955 Dodge Custom Royal Lancer Tri-tone 1966 Rambler Classic 770 Convertible |
||||
|
||||
|
Home away from home
|
There is nothing strange about not getting an immediate answer when looking for parts for a 90 year old car. Neither Rome nor antique cars are built or rebuilt in a day.
Yes we have new pistons for $80 each but you did not state what oversize (if any) you need. We do not have all sizes but we also have semi-finished pistons. Do you need rings also?
Posted on: 2017/5/1 14:56
|
|||
|
||||
|
Home away from home
|
Here are the pictures of the 28 6 pistons. I have no idea what it would cost to ship, you must find out. I will find out costs to ship to east coast. There is no damage, don't forget they are 60 oversize. They are made by Jahns Pistons. Dell
Attach file:  (209.17 KB) (250.54 KB) (282.46 KB) (178.67 KB)
Posted on: 2017/5/3 17:38
|
|||
|
35-1200 touring sedan 42-110 convertible coupe 48-2293 station sedan |
||||
|
||||
