Re: Need 526 carb linkage...at least a picture????
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
Probably not exactly the same but here's a very similar arrangement on a 2nd Series Single Eight. Note what appears to be the same bracket on the exhaust manifold providing the rear pivot point for the rotational actuating rod.
Posted on: 2017/10/14 9:39
|
|||
|
Re: Need 526 carb linkage...at least a picture????
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Many thanks for the pic....will try to analyze the linkage.
Bob
Posted on: 2017/10/14 20:03
|
|||
|
Re: Need 526 carb linkage...at least a picture????
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
This is the set up on the 633 which I would expect will be very similar to the 526. Its a bit hard to photograph with the spare wheel in place.
Posted on: 2017/10/14 20:17
|
|||
|
Re: Need 526 carb linkage...at least a picture????
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Hi Bob; I am on vacation and will return the end of the month. If you need more in formation please let me know and I can take detailed pictures and dimensions from my 526. Dell
Posted on: 2017/10/15 11:06
|
|||
35-1200 touring sedan 42-110 convertible coupe 48-2293 station sedan |
||||
|
Re: Need 526 carb linkage...at least a picture????
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
I appreciate the pics and support with this challenge.
Again....many thanks. Bob
Posted on: 2017/10/16 20:28
|
|||
|