Unknown Part 5
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Here is unknown part 5
Posted on: 2020/6/24 9:43
|
|||
Roger Howe
Whitewright, TX 1937 120C Touring Sedan |
||||
|
Re: Unknown Part 5
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
portion/half of 300875. Detritus.
Posted on: 2020/6/24 18:20
|
|||
|
Re: Unknown Part 5
|
||||
---|---|---|---|---|
Webmaster
![]() ![]() ![]() |
You can lookup most parts in the Packard Parts List here in the website. Here is the listing for the Part # called out by Flack:
https://packardinfo.com/xoops/html/modules/partslist/index.php?mode=partnumber&SearchValue=300875&ButtonLookup=Go
Posted on: 2020/6/25 9:31
|
|||
-BigKev
1954 Packard Clipper Deluxe Touring Sedan -> Registry | Project Blog 1937 Packard 115-C Convertible Coupe -> Registry | Project Blog |
||||
|
Re: Unknown Part 5
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Thanks, Kev, but where does it go? I see a part just like this attached to the back of the transmission housing on the bottom, but could not seem to attach this one with it to act, as they call it, a "snubber." Yes, I do see it in the Packard parts list, but could not get it to fit on the engine itself or to the other snubber on the transmission. Does it really go on thie one on the transmission housing and I just failed to get it to fit?
Thanks again for the information.
Posted on: 2020/6/25 10:50
|
|||
Roger Howe
Whitewright, TX 1937 120C Touring Sedan |
||||
|
Re: Unknown Part 5
|
||||
---|---|---|---|---|
Webmaster
![]() ![]() ![]() |
In the parts list, there is no further description of it. That's it. Hopefully one of the guys has picture of it installed or something for reference.
Posted on: 2020/6/25 12:18
|
|||
-BigKev
1954 Packard Clipper Deluxe Touring Sedan -> Registry | Project Blog 1937 Packard 115-C Convertible Coupe -> Registry | Project Blog |
||||
|
Re: Unknown Part 5
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
The snubber is two pieces of flat bar stock, held together with vulcanized rubber. One goes on the back of the transmission, the other bolts to your frame. Minimizes clutch chatter.
Posted on: 2020/6/25 12:27
|
|||
1937 120 1092 - Original survivor for driving and continued preservation. Project blog / Registry
1937 115 1082 - Total basket case, partial restoration, sold Hershey 2015 Project blog / Registry |
||||
|
Re: Unknown Part 5
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Yes, I have it in position except for the vuncanized rubber. I did find the piece to which this fits and am just awaiting for the front piece to dry from painting.
Thank you for all of the information.
Posted on: 2020/6/25 15:48
|
|||
Roger Howe
Whitewright, TX 1937 120C Touring Sedan |
||||
|