Re: Owens Dyneto CG-678 Generator Internal Wiring Diagram (1928 - 526/33)
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
You might check the AEA drawings available in the wiring section at the PAC site.https://www.packardclub.org The generators are all shown with internal wiring and it looks to be the same for the 326 and 426. I don't find a wiring sheet for a 528 but there is one for a 1928 526/533 and if it is the same generator as the one shown on earlier models it is wired slightly different from them.
I believe Jason at AER is quite experienced with the Owen-Dyneto generators. EDIT: Jason's website did not open for me this morning so don't know if his provider is having issues or the virus shutdown might have affected his business. Attach file: ![]() ![]()
Posted on: 2020/8/1 9:50
|
|||
Howard
|
||||
|
Re: Owens Dyneto CG-678 Generator Internal Wiring Diagram (1928 - 526/33)
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
After original Owen Dyneto factory information, the next best source of information would probably be the "Standard Auto-Electricians Manual". Mine is out on loan but several others who frequent this forum have copies so hopefully one of them will see this and respond to you.
Posted on: 2020/8/1 15:07
|
|||
|
Re: Owens Dyneto CG-678 Generator Internal Wiring Diagram (1928 - 526/33)
|
||||
---|---|---|---|---|
Quite a regular
![]() ![]() ![]() |
Thanks. I did look at the diagram and it shows more information than the schematic in the Packard manual. Will look carefully at the drawing and see if it matches the words in the manual.
Quote:
Posted on: 2020/8/2 1:16
|
|||
Rob Guzzetta
|
||||
|
Re: Owens Dyneto CG-678 Generator Internal Wiring Diagram (1928 - 526/33)
|
||||
---|---|---|---|---|
Quite a regular
![]() ![]() ![]() |
I am not familiar with that publication and will try to find it. Thanks!Quote:
Posted on: 2020/8/2 1:17
|
|||
Rob Guzzetta
|
||||
|