Re: 47 Clipper rear axle bearing play / clearance
|
||||
---|---|---|---|---|
Home away from home
|
The easiest trick: raise the rear and remove the wheels. Take a feeler gage or caliper and measure the gap between the brake drum and the backing plate whilst pushing in firmly on the axle. Then measure again whilst pulling outward on the axle.
Or, if you have a friend who is a machinist, borrow a dial indicator with a magnetic base and mount it on the axle behind the backing plate. Adjust the indicator to reach the flange of the brake drum and measure whilst pushing in then pulling out.
Posted on: 2021/8/28 6:17
|
|||
|
Re: 47 Clipper rear axle bearing play / clearance
|
||||
---|---|---|---|---|
Just can't stay away
|
thank you very much for your reply. I will try like you proposed. BR Josef
Posted on: 2021/8/29 3:45
|
|||
Packard Super Clipper 1947
|
||||
|
Re: 47 Clipper rear axle bearing play / clearance
|
||||
---|---|---|---|---|
Just can't stay away
|
thank you very much for your reply. I will try like you proposed. BR Josef
Posted on: 2021/8/29 3:46
|
|||
Packard Super Clipper 1947
|
||||
|
Re: 47 Clipper rear axle bearing play / clearance
|
||||
---|---|---|---|---|
Home away from home
|
Did I miss something? How much play should there be?
Posted on: 2021/9/7 20:10
|
|||
If you're not having fun, maybe it's your own damned fault.
|
||||
|
Re: 47 Clipper rear axle bearing play / clearance
|
||||
---|---|---|---|---|
Forum Ambassador
|
.004 to .007.
This thread has a photo of the factory measuring tool and a couple of posts farther down a photo of an inexpensive home made version JWL put together.packardinfo.com/xoops/html/modules/newbb ... 1697&post_id=210990#forumpost210990
Posted on: 2021/9/7 20:21
|
|||
Howard
|
||||
|
Re: 47 Clipper rear axle bearing play / clearance
|
||||
---|---|---|---|---|
Just popping in
|
between. . 004" and .007" range. Sorry Howard , I must of. been typing while you where posting the answer.
Posted on: 2021/9/7 20:24
|
|||
|
Re: 47 Clipper rear axle bearing play / clearance
|
||||
---|---|---|---|---|
Home away from home
|
Four to seven thousandths. Thanks.
Posted on: 2021/9/8 5:11
|
|||
If you're not having fun, maybe it's your own damned fault.
|
||||
|
Re: 47 Clipper rear axle bearing play / clearance
|
||||
---|---|---|---|---|
Home away from home
|
You only need to set the axle end play clearance on one side.
Posted on: 2021/9/8 10:41
|
|||
We move toward
And make happen What occupies our mind... (W. Scherer) |
||||
|