Re: Fan belt 1941 180
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Permatex or Indian Head shellac types are superior. Messy, PITA, but superior. It's also not a "some's good so more is better" thing, just a nice easy coat on the block surface then to the gasket on the pump which will hold it in place. I hate RTV for anything but an oil pan, and sometimes not even that but you do you.
Posted on: 2021/10/30 12:50
|
|||
|
Re: Fan belt 1941 180
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
In honor of my father's efforts with shellac and hearing that he had it right in the first place, I will stay with shellac. Thanks for the reinforcement.
Posted on: 2021/10/30 17:05
|
|||
|
Re: Fan belt 1941 180
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
We took the water pump off the survivor 41 160. I had 2 choices to get the bottom bolt off. Remove the motor mount (?) or clearace it with a rough rasp on a die ginder. I took choice 2. The center mount is like brand new and not sagged out in the least. In fact all the mounts are wonderful and sound, solid. I found it rather unusual that there'd be such a dire clearance issue there. The car has 35,000 original miles and doesn't even "sag' up front like nearly all 160s do. All of us 160 mavens know what I'm talking about, that's a hefty engine. How did yours go? And yes the belt was a lesson in cursing proper.
Posted on: 2021/10/31 11:05
|
|||
|
Re: Fan belt 1941 180
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Well I suppose the motor mount is not in what I call a "Dazzle Zone" - that is where your eye goes first impression, but a flat piece of wood and a jack under the oil pan will raise the motor especially if you loosen the two bolts on the mount itself.
As well, the same process is very helpful for removing oil pans. Remove the two lower motor mount bolts that go through the frame, raise the motor, and shove two pieces of wood under the lower mount arms. That gives lots of room to do things like ring and bearing jobs in the car. I even had a chunk of 3/4 plywood with a relief cut into it to prevent interference with the drain plug. The grinding method is something that works only if you aren't bothered by people making fun of you.
Posted on: 2021/10/31 11:44
|
|||
|
Re: Fan belt 1941 180
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Highlander, I didn’t have to or want to replace the fan belt so with a more fearless and experienced buddy at hand, we got the pulley off and the fan belt released. It is still hanging there so I didn’t have to deal with the mount issue. In the meantime, I have been fortunate enough to add a retired mechanic to the mix. He has his own Packard that has languished in his garage (1954 Patrician) and has enthusiastically offered to help me with both my cars as he enjoys working on the older simpler cars. When it comes to the motor mount someplace down the road I was gladly enlist his help.
Posted on: 2021/10/31 13:09
|
|||
|
Re: Fan belt 1941 180
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Thanks ever so much. I never worked on a Packard before, your insights are, well...
That was directed at Cole BTW
Posted on: 2021/10/31 20:29
|
|||
|