Wheelhorse76	Re: 1948 Packard not starting	#71
Just can't stay away Joined: 2021/4/15 12:46 Last Login : 9/27 16:37 From Orient , Ohio Group: Registered Users Posts: 85	I’d pull the head , clean it up make sure valves aren’t stuck open . Compression doesn’t have to be high ,as much as consistent across all 8 holes . Like 5 psi difference with all 8 . Good luck !! Posted on: 2021/8/17 20:15

bear	Re: 1948 Packard not starting	#72
Just can't stay away Joined: 2021/5/30 19:40 Last Login : 6/2 19:58 From florida Group: Registered Users Posts: 97	carb starter switch is a real pain in the butt. I rewired mine to a starter button on the dash. 100% reliable Posted on: 2023/9/28 20:44

bear	Re: 1948 Packard not starting	#73
Just can't stay away Joined: 2021/5/30 19:40 Last Login : 6/2 19:58 From florida Group: Registered Users Posts: 97	carb starter switch is a real pain in the butt. I rewired mine to a starter button on the dash. 100% reliable Posted on: 2023/9/28 20:44

Lonny	Re: 1948 Packard not starting	#74
Home away from home Joined: 2013/1/26 11:10 Last Login : 2023/10/15 17:07 From Sturgis, SD Group: Registered Users Posts: 132	there is 2 wires on my 1948 on the side of the carb a small ball baring is inside when the igntion switch is turned on the ball baring compleats the curcuit to the starter solenoid Posted on: 2023/10/11 8:09

Packard Don	Re: 1948 Packard not starting	#75
Home away from home Joined: 2014/7/15 13:30 Last Login : Today 21:14 From Crooked River Ranch, OR Group: Registered Users Posts: 6196	No quite. The bearing actuates the switch. It is the switch that does the electrical work, not the ball. Posted on: 2023/10/11 13:21
	All generalities are false. Don Pierson Packard / IMPERIAL page CA DMV Licensed Vehicle VIN Verification 1951 Henney-Packard 3-Door Long Wheelbase Air Force Ambulance 1954 Packard Patrician 1954 Packard Patrician Parts Car 1956 Clipper Custom Sedan

HH56	Re: 1948 Packard not starting	#76
Forum Ambassador Joined: 2007/4/20 19:54 Last Login : 11/19 14:32 From Fresno CA Group: Registered Users Forum Ambassadors Posts: 18859	Quote: Packard Don wrote: No quite. The bearing actuates the switch. It is the switch that does the electrical work, not the ball. Here is what the switch looks like. Attach file:   Carb switch_Page_2 copy.jpg (95.77 KB)   carb start sw.jpg (135.35 KB) Posted on: 2023/10/11 14:18
	Howard