Packard Forum Index » Post-War (1946-54)

Topic: Radiator Cap

Bottom

Previous Topic

Next Topic Register To Post

« 1 (2)

wgb1956

Re: Radiator Cap

#11

Just popping in

I am also looking for a 12 or 13 lb pressure cap. My 1953 has a 1" deep filler neck, not the standard 3/4" that most other vehicle brands seem to have used.
Does anyone have a 13 lb. cap cross-reference number that will work for this 1" depth? (Or a good used cap to sell?)
I can find 13 lb/3/4" depth caps, and 7 lb/1" depth caps, but not the 13 lb/1" variety.
I believe the numbers listed in the Packard cross-reference list are for 3/4" depth. (Did Packard use both 3/4" and 1" deep radiator necks from 51-54? Both radiators I have are 1" deep).
Many thanks for the assistance, as always.

Posted on: 6/20 10:10

53 Cavalier

Re: Radiator Cap

#12

Home away from home

Quote:

wgb1956 wrote:
I am also looking for a 12 or 13 lb pressure cap. My 1953 has a 1" deep filler neck, not the standard 3/4" that most other vehicle brands seem to have used.
Does anyone have a 13 lb. cap cross-reference number that will work for this 1" depth? (Or a good used cap to sell?)
I can find 13 lb/3/4" depth caps, and 7 lb/1" depth caps, but not the 13 lb/1" variety.
I believe the numbers listed in the Packard cross-reference list are for 3/4" depth. (Did Packard use both 3/4" and 1" deep radiator necks from 51-54? Both radiators I have are 1" deep).
Many thanks for the assistance, as always.

I haven't had to go looking for a radiator cap for my 53 Cavalier, but it does have a 1" filler neck as well. When I look at a couple of the radiator caps on the cross-reference list for a 53 they are for a 3/4" neck. Maybe something that should be reviewed and updated, unless some 53's did have a 3/4" neck. Max Merritt lists a radiator cap for $50. Ouch!

Posted on: 6/20 11:31

todd landis

Re: Radiator Cap

#13

Home away from home

https://www.ebay.com/itm/315289934441?itmmeta=01J0VCD0HJMJX509T520EJWPRT&hash=item4968be9a69:g:nxoAAOSwZwFmGVy1&itmprp=enc%3AAQAJAAAA4CgzKhUPQHU%2BDOi9sDvDzBcX1VQDxfLkpeB3hDH1O%2BysxzRGMfVXKKVwgAcJkJDDnCrv%2FW3rRRhQzpa%2B3hlYEWayEH8jQaZX3PCTi6PV9lZklzXGW1mUAtbrnsSOqFG5tvR9K8VuaFs6ug%2FbKHqX3Ivi2%2BWf6fFuyLAea%2FvleF8KbuPy8OG5iBKgazjsFYT6H95BXCmJg%2BiOkPhQdmc3HxrsS9sV2vbaPZGl7vX%2BIYl04sIlaxbwqdC6C4poaLb%2BfSYqHzN1SC341Kbm%2FFN2%2B7Qepw3hE5L1kLwxuXiUlfOm%7Ctkp%3ABk9SR_CItOyGZA

Might give this a try, does not say how many pounds.

Posted on: 6/20 12:56

53 Cavalier

Re: Radiator Cap

#14

Home away from home

Quote:

todd landis wrote:
https://www.ebay.com/itm/315289934441?itmmeta=01J0VCD0HJMJX509T520EJWPRT&hash=item4968be9a69:g:nxoAAOSwZwFmGVy1&itmprp=enc%3AAQAJAAAA4CgzKhUPQHU%2BDOi9sDvDzBcX1VQDxfLkpeB3hDH1O%2BysxzRGMfVXKKVwgAcJkJDDnCrv%2FW3rRRhQzpa%2B3hlYEWayEH8jQaZX3PCTi6PV9lZklzXGW1mUAtbrnsSOqFG5tvR9K8VuaFs6ug%2FbKHqX3Ivi2%2BWf6fFuyLAea%2FvleF8KbuPy8OG5iBKgazjsFYT6H95BXCmJg%2BiOkPhQdmc3HxrsS9sV2vbaPZGl7vX%2BIYl04sIlaxbwqdC6C4poaLb%2BfSYqHzN1SC341Kbm%2FFN2%2B7Qepw3hE5L1kLwxuXiUlfOm%7Ctkp%3ABk9SR_CItOyGZA

Might give this a try, does not say how many pounds.

Velvac shows that as a 7 lb cap.

Posted on: 6/20 13:56

wgb1956

Re: Radiator Cap

#15

Just popping in

Yes, the Velvac catalog only has 4 and 7 lb at 1” depth.

Posted on: 6/20 15:20

BigKev

Re: Radiator Cap

#16

Webmaster

A RC-6 is a 13lb cap. The specs show a cap depth of 24.4mm which .961 inches.

Posted on: 6/20 16:06

-BigKev

1954 Packard Clipper Deluxe Touring Sedan -> Registry | Project Blog

1937 Packard 115-C Convertible Coupe -> Registry | Project Blog

53 Cavalier

Re: Radiator Cap

#17

Home away from home

Quote:

BigKev wrote:
A RC-6 is a 13lb cap. The specs show a cap depth of 24.4mm which .961 inches.

+

I looked at that as well, but the filler neck height is shown as 19.5 mm or 3/4". I think 24.4 mm is the total cap height.
https://partshawk.com/acdelco-rc6-radiator-cap.html

Posted on: 6/20 16:14

Board index » Discussion » Post-War (1946-54) » Radiator Cap

Top

Previous Topic

Next Topic

« 1 (2)

	';
Hello and welcome to Packard Motor Car Information! If you're new here, please register for a free account.