Packard Forum Index » Pre-War (1899-1942)

Does anyone have a diagram or drawing where to place the sun visor in a 1932 Packard or similar.
I have the visor with hinges but can not locate possible holes in the wood roof member to secure the hinge.
The closest I have found is the attached picture in a recent car on line.

Attach file:

---

  7161a-000-c-9-bc-4-be-5-8f-50-2840c-57-f1903_-1-_201_a.jpeg (536.61 KB)

Those look backwards. I’ve always seen the hinged side closer to the windshield

The pictures are correct for the early cars. My 33 1003 were the same.

My 1934 1100 sedan visors are positioned the same as pictured.

Thanks for furthering my Packard education!

In the next to last page of a 1933 bulletin there is mention that visors were also available for the front door window. Those were mounted over the door and apparently folded flat to the roof similar to the windshield visor. Can't see much of the details because of he poor quality of the bulletin but curious if the door visors are the same size or could they have all been interchangeable.

I've seen that feature, sorry no photos, but its entirely different in size and mounting.