Re: 1955 Patrician - On The Road Again Journey
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Nice fix. But your arm is actually attached upside-down. Flip it over and re-adjust your linkage so that the column lever can't move the pawl too far, and then confirm the rest of the gear positions are correct.
Don't worry, the arm orientation annoys me as well because there is nowhere in the 55 service manual that it actually tells you how to do it. There is a step and photo, but they reused the different and incompatible 54GS (or earlier?) photo and explanation. Top view in the factory drawing. ![]()
Posted on: Yesterday 21:49
|
|||
1955 400 | Registry | Project Blog
1955 Clipper Deluxe | Registry | Project Blog 1955 Clipper Super Panama | Registry |
||||
|
Re: 1955 Patrician - On The Road Again Journey
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
This is one of the linkages, you can thread it to adjust. It is NOT supposed to be bent, I will have to straighten or replace mine or lengthen the adjustment to compensate.
![]()
Posted on: Today 7:46
|
|||
1955 400 | Registry | Project Blog
1955 Clipper Deluxe | Registry | Project Blog 1955 Clipper Super Panama | Registry |
||||
|