Merry Christmas and welcome to Packard Motor Car Information! If you're new here, please register for a free account.  
Login
Username:

Password:

Remember me



Lost Password?

Register now!
FAQ's
Main Menu
Recent Forum Topics
Who is Online
99 user(s) are online (96 user(s) are browsing Forums)

Members: 0
Guests: 99

more...
Helping out...
PackardInfo is a free resource for Packard Owners that is completely supported by user donations. If you can help out, that would be great!

Donate via PayPal
Video Content
Visit PackardInfo.com YouTube Playlist

Donate via PayPal



« 1 (2) 3 4 5 6 »

Re: 1937 Super 8 not restarting when hot
#11
Not too shy to talk
Not too shy to talk

PackDan
See User information
Well I did some looking around. Would someone point me in the right direction, where I can find instructions on checking the fuel level. I am sure there is more to it then taking off the top and measuring. Do I crank the car over with the ignition off to fill the bowl? Or what's the best method?

Posted on: 10/9 9:04
 Top  Print   
 


Re: 1937 Super 8 not restarting when hot
#12
Home away from home
Home away from home

Gar
See User information
I am leaning on the carburetor issue as well.

An easy way to check that is to turn off the engine when it it hot, remove the air cleaner and see if a faint vapor mist exiting out the the top of the carburetor. If it does that, then you have gas dripping into the carb while it is off and flooding the engine.

Gar

Posted on: 10/9 9:05
 Top  Print   
 


Re: 1937 Super 8 not restarting when hot
#13
Home away from home
Home away from home

Bob Supina
See User information
I have electric fuel pumps on all my cars to fill the carb after sitting a long time. It saves the starter and the battery.
It is also beneficial on hot days down here in Texas when you stop at a long traffic light. Starting up, I would always have a vapor lock. 3 second blast from the elec pump and the line would be cleared.

Posted on: 10/9 11:38
 Top  Print   
 


Re: 1937 Super 8 not restarting when hot
#14
Not too shy to talk
Not too shy to talk

PackDan
See User information
I checked the fuel level in the bowl, it was right on. The timing was at 7, so I retarded it to 10. I pulled the air cleaner and the carb was clear. Pic shortly after shutting down. I then went to restart it with no luck. I then grabbed the ignition coil and it was hot enough, I couldn't keep my hand on it. Next test will be the resistance of the coil, both cold and hot to see if it is failing when hot
Click to see original Image in a new window


Click to see original Image in a new window

Click to see original Image in a new window


Click to see original Image in a new window

Posted on: 10/9 16:56
 Top  Print   
 


Re: 1937 Super 8 not restarting when hot
#15
Home away from home
Home away from home

kevinpackard
See User information
Sounds like the coil to me. Very similar to the problem I had, though mine would restart easier after cooling for a sufficient time. Napa has replacements, or Dwight Heinmuller also has 6 and 12V coils in stock. Of course Kanter and Max Merritt would have them too.

-Kevin

Posted on: 10/9 17:44
 Top  Print   
 


Re: 1937 Super 8 not restarting when hot
#16
Home away from home
Home away from home

tsherry
See User information
Fuel, spark and compression. You've got fuel. Unless the engine sounds noticeably different on trying to start it, your timing system is good. Therefore, spark.

In my experience coils work great, up until the point where they don't. Had a soft-fail on a Ford coil in my old Galaxie, eventually a hard-fail. Weak spark then no spark.

Sub in a replacement coil and let us know how it works.

Posted on: 10/9 21:48
 Top  Print   
 


Re: 1937 Super 8 not restarting when hot
#17
Not too shy to talk
Not too shy to talk

PackDan
See User information
Tested the coil cold. It's at .9 ohms on the primary when the meeter is set to 200, 4.7 on the secondary when set to 200k

Posted on: 10/11 10:52
 Top  Print   
 


Re: 1937 Super 8 not restarting when hot
#18
Not too shy to talk
Not too shy to talk

PackDan
See User information
After checking it hot. The coil went to 1.0 and 5.1 respectively. I am going to stop and get a new coil tomorrow. From what I am finding it should be 1.5 and 8-9. I swapped in another coil that tested the same cold, and the car fired up. Fingers crossed it is the coil.

Posted on: 10/11 14:33
 Top  Print   
 


Re: 1937 Super 8 not restarting when hot
#19
Home away from home
Home away from home

TxGoat
See User information
Resistance would normally increase when hot. However, that does not eliminate the coil as a possible cause.

Posted on: 10/11 15:07
 Top  Print   
 


Re: 1937 Super 8 not restarting when hot
#20
Home away from home
Home away from home

32model901
See User information
I'd suggest changing the condenser for the points, if this hasn't been done already. A common failure mode is a failure when hot.

Posted on: 10/12 7:27
 Top  Print   
 




« 1 (2) 3 4 5 6 »





- The following Google Ad-Sense Advert helps fund the cost of providing this free resource -
- Logged in users will not see these. Please Join and Donate to help support the website -
Search
Recent Photos
Photo of the Day
Recent Registry
Upcoming Events
Website Comments or Questions?? Click Here Copyright 2006-2024, PackardInfo.com All Rights Reserved