Re: Universal Joint Lubrication - 1941 Packard 110
|
||||
---|---|---|---|---|
Webmaster
![]() ![]() ![]() |
Unless leaking profusely, and you need to change the pinion seal, don't touch that center pinion bolt. That is the rear half of U-joint that bolts to the differential. That has a very specific pre-load on it that you dont want to disturb unless absolutely required.
Posted on: 5/28 22:11
|
|||
-BigKev
1954 Packard Clipper Deluxe Touring Sedan -> Registry | Project Blog 1937 Packard 115-C Convertible Coupe -> Registry | Project Blog |
||||
|
Re: Universal Joint Lubrication - 1941 Packard 110
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Really good to know, BigKev! Thanks for the heads up. I won't mess with it since it seems OK so far.
As far as differential fluid, what are you guys recommending and how often do you change it? I opened it up about 8 years ago and the stuff that came out smelled horrible! Can't recall what I replaced it with but thinking it could be time to do it again after 4K miles?
Posted on: 6/3 15:03
|
|||
|
Re: Universal Joint Lubrication - 1941 Packard 110
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Hopefully you're aware that differential fluid is supposed to smell like a sulfur pit? It also won't get darker with age or use unless something is seriously wrong (engine oil does from carbon buildup).
Traditionally it was once a year to change it but it seems like most people pretty much never change it unless their cars are getting actual mileage. I'm likewise curious to know what a reasonable time-based interval would be for the average enthusiast owner.
Posted on: 6/3 15:48
|
|||
1955 400 | Registry | Project Blog
1955 Clipper Deluxe | Registry | Project Blog 1955 Clipper Super Panama | Registry Email (Parts/service inquiries only, please. Post all questions on the forum.) service@ultramatic.info |
||||
|
Re: Universal Joint Lubrication - 1941 Packard 110
|
||||
---|---|---|---|---|
Just can't stay away
![]() ![]() ![]() |
Diff fluid should be changed out at least every 100K miles. With our antiques, we're more concerned with condensation and sludge build up.
Best practice would be to flush diff housing with alcohol, not diesel or parts cleaner, because they leave a film on parts and the fresh diff lube doesn't bind to the parts as well. After flushing fill diff with straight 90w mineral hypoid gear lubricant or 85w-90 diff lube provided your differential doesn't have any bronze or brass shims or spacers in it. Most do not but very early units might. The extreme pressure additives break down the "yellow" metals. After 8 years, I would r&r the diff fluid. PB
Posted on: 6/3 17:06
|
|||
|