Packard Forum Index » Project Blogs

Topic: RIk's 56 ultramatic

Bottom

Previous Topic

Next Topic Register To Post

« 1 ... 77 78 79 (80)

R H

Re: RIk's 56 ultramatic

#791

Home away from home

36 12

Wish I had blueprint.

Positive ground, must be why full tank high ohms

56 tank full 10 ohms.

So took apart sending unit top to reverse ohms.
Which once I had blueprint didn’t need to.

Original unit works , cleaned up well with phosphoric acid ,,

Attach file:

225619 41.pdf Size: 2,705.13 KB; Hits: 9

jpg

20250709_000434.jpg (3,330.54 KB)

20250709_000511.jpg (3,022.34 KB)

Posted on: 7/9 3:49

Riki

Packard Don

Re: RIk's 56 ultramatic

#792

Home away from home

Oh. I thought this topic was 1956 Ultramatic.

Posted on: 7/9 11:50

Pgh Ultramatic

Re: RIk's 56 ultramatic

#793

Home away from home

I cleaned this up as best as possible in a reasonable amount of time.

Attach file:

225619.jpg (6,185.60 KB)

Posted on: 7/9 13:03

R H

Re: RIk's 56 ultramatic

#794

Home away from home

Thanks spud...

Posted on: 7/9 14:51

Riki

R H

Re: RIk's 56 ultramatic

#795

Home away from home

Don

I'm going to have both, the 36 and 56 here, instead of having 2 blogs.

I Might ask Kevin if its a pain to add 36 to the heading.

Posted on: 7/9 22:16

Riki

R H

Re: RIk's 56 ultramatic

#796

Home away from home

Clips

You have to squeeze these a bit

Attach file:

20250711_000401.jpg (3,611.39 KB)

Posted on: Today 3:09

Riki

R H

Re: RIk's 56 ultramatic

#797

Home away from home

Found the front engine mount for 12.

That will need to get blasted, also by luck, found the plate. Ill have to wait on the bushing..

Cleaned the plate . The a phosphoric acid bath.
Ready to paint

Using timing cover extreme right

Attach file: