Packard Forum Index » Pre-War (1899-1942)

While I have my 1808 off the floor, thinking about changing the rear overdrive seal. It weeps just a bit. In the past I have used gl4 140 sta lube gear oil. The manual suggests a 90 to 140 closer to 140 in warmer climates. I am in Las Vegas, definitely warmer. Need the latest thoughts, I can stay with the gl4 140, or I see a Lucas Gl5 90 to 140. Or see many 90 to 140 synthetic oils. What is the current set up for transmission gear oil? Thanks

What I use in my ‘40 160 with OD

Attach file:

---

  IMG_0155.jpeg (2,836.18 KB)

Joe's right as rain. That's exactly what i use in my '47 Super Clipper's overdrive transmission, essentially the same drivetrain as your and his '40 One-Sixties. GL-5 is fine for the differential. Check the overdrive and transmission levels separately.

This subject's been covered on these forums what, 127 times?

BigKev provided a nifty, easy Search bar on the upper right of this fine sites' homepage.

This is what I use as well. Recommended by Ross to keep transmissions happy. This is standard GL1-90W. No friction modifiers that can make old transmissions unhappy.

ok, will go to the napa 90gl1 thanks Available at napa a couple miles from me.