Packard Forum Index » V-8 (1955-56)

Topic: V8 Lifters

Bottom

Previous Topic

Next Topic Register To Post

« 1 (2)

Pgh Ultramatic

Re: V8 Lifters

#11

Home away from home

Quote:

Jack Vines wrote:

Please, just please, do some additional research and determine for yourself the accuracy of what you posted. If correct, state the manufacturer's catalog source; if it requires correction please do so.

One more time, the Rock Auto and NAPA online data bases are not reliable sources. They are far removed from the manufacturer's catalog.

jack vines

I would be curious to know how you cross-check this information.

Ok, I edited my original post.

Posted on: 8/17 14:45

Jack Vines

Re: V8 Lifters

#12

Home away from home

Quote:

Pgh Ultramatic wrote:I would be curious to know how you cross-check this information.

For lifters, I buy direct from Johnson Hylift, AFAIK the only remaining US manufacturer and trust their catalog.

Quote:

Pgh Ultramatic wrote:Ok, I edited my original post.

Thank you.

Quote:

R H wrote: Dodge 318 engine mid 60s , 70s

Dodge 318" and 326" V8s 1959-68

and AMC 250" and 327" V8s 1957-60

jack vines

Posted on: 8/17 16:43

Pgh Ultramatic

Re: V8 Lifters

#13

Home away from home

Here is my collection of lifters:
- 2 of NOS plus like 20 of used 476060
- 9 of Sealed Power HT-879 (flash rust on some)
- 8 of TRW VL58
- 16 of 37-7314 in Unitap By RMS CA-3500 box (not sure if box is related)

The 37-7314 seem a good replacement as well as the rod seats nicely and the overall height is the same as NOS and the HT-879. The VL58 the rod is 1/8" too tall. Not sure if the seat radius is correct.

Attach file:

PXL_20250825_041210095.jpg (2,492.29 KB)

Posted on: Yesterday 23:23

Board index » Discussion » V-8 (1955-56) » V8 Lifters

Top

Previous Topic

Next Topic

« 1 (2)

	';
Hello and welcome to Packard Motor Car Information! If you're new here, please register for a free account.