Valuation help needed for a 2472
|
||||
---|---|---|---|---|
Not too shy to talk
|
Hi gang,
I've decided, after much soul-searching, to sell my Packard. I just don't make enough to keep it up, and having no garage, the elements have taken their toll. It deserves to be with somebody who can afford to treat it the way a Packard deserves to be treated. What I need help with is determining how much it's worth and how much I should ask for it. I'm selling it on craigslist, as I'm moving soon, and need it to sell fairly quickly. There's no need to be delicate--I know it's rough, and I need honest opinions. The condition of the body is a little distressed, but restorable (what isn't?). I've attached photos so you can see the condition. I didn't show the rockers, which are both holed and need replacement. Beyond that, at the bottoms of a couple fenders and a couple doors, there's bubbling, which is also present over each rear wheel arch. The passenger side door window is cracked and needs replaced. I have the pelican--it's removed for security. The paint isn't quite as bad as the photos show. The car is filthy and the sides are covered with cut grass, etc. Living in an apartment makes washing it difficult. The interior fabrics were redone (covered over, actually) a long time ago, and are still in great condition. They're not original-type fabrics (they're synthetic, I believe), but they were probably the closest match that was available then. The metal interior parts need repainting and the headliner has to be replaced. Mechanically, the engine and transmission run perfectly, despite appearances. The wiring harness is original and needs to be replaced. The passenger side windshield wiper cable broke, too, but I have everything needed to fix the problem. The biggest issue, though, is the brakes. I had a shoe break loose on the back driver's side, and it wiped out everything between the backing plate and drum. I have all the parts to fix this, but haven't done it. Photos can be found here: thegreatgildersleeve.net/sharedfiles/misc/51packard300/
Posted on: 2011/5/3 20:01
|
|||
Darrin ~ 2472
|
||||
|
Re: Valuation help needed for a 2472
|
||||
---|---|---|---|---|
Home away from home
|
Just as a guess, I'd say $5000-7000. Anyone else?
Posted on: 2011/5/3 20:19
|
|||
[color=0099FF]Respectfully,
|
||||
|
Re: Valuation help needed for a 2472
|
||||
---|---|---|---|---|
Home away from home
|
There's much more interesat/action in Calif but the bodies are usually rust free. To get just the body of this car to equal a rust free Calif car might cost $5000-$7000 alone. I'm talking first class cut no corners metal replacement. A shoddy bondo job will be cheap and disintegrate in a few years.
I feel this car, needing much work, is worth $2500.
Posted on: 2011/5/3 22:06
|
|||
|