|
Re: 1937 120 Trunk Shelf
|
||||
|---|---|---|---|---|
|
Home away from home
 
|
Roger - the latter. The edge of the plywood has a rounded profile in the vertical dimension, along the edge. It measures as semi-circular, so 1/4" radius on a 1/2" thick shelf. The back edge of the shelf is straight along the width of the trunk.
Attach file:  (70.29 KB)
Posted on: 2020/7/28 7:14
|
|||
|
1937 120 1092 - Original survivor for driving and continued preservation. Project blog / Registry
1937 115 1082 - Total basket case, partial restoration, sold Hershey 2015 Project blog / Registry |
||||
|
||||
|
Re: 1937 120 Trunk Shelf
|
||||
|---|---|---|---|---|
|
Home away from home
|
Good Morning...When attempting a finished end on plywood, most find that using a piece of half round from the lumber store and attaching it with waterproof glue and long finishing nails in predrilled holes works really good.
Posted on: 2020/7/28 9:37
|
|||
|
Caretaker of the 1949-288 Deluxe Touring Sedan
'Miss Prudence' and the 1931 Model A Ford Tudor 'Miss Princess' 
|
||||
|
||||
|
Re: 1937 120 Trunk Shelf
|
||||
|---|---|---|---|---|
|
Home away from home
|
Lots of good wood working advice! Not sure how Packard did it, but the edge is just plywood.
Posted on: 2020/7/28 10:12
|
|||
|
1937 120 1092 - Original survivor for driving and continued preservation. Project blog / Registry
1937 115 1082 - Total basket case, partial restoration, sold Hershey 2015 Project blog / Registry |
||||
|
||||
|
Re: 1937 120 Trunk Shelf
|
||||
|---|---|---|---|---|
|
Home away from home
|
Yes, a lot of very good woodworking advice and my hearty thanks to you all. I shall proceed along those lines when I get my template and am able to continue with this piece.
Posted on: 2020/7/29 9:58
|
|||
|
Roger Howe
Whitewright, TX 1937 120C Touring Sedan |
||||
|
||||
