|
Re: Thermostat Housing Neck Gasket
|
||||
|---|---|---|---|---|
|
Home away from home
 
|
On my '37 it is normal gasket paper thickness. About 1/32", but that's just a guess. I sealed mine with Indian Head and nad nl leaks from there upon startup.
Posted on: 2017/3/26 8:02
|
|||
|
1937 120 1092 - Original survivor for driving and continued preservation. Project blog / Registry
1937 115 1082 - Total basket case, partial restoration, sold Hershey 2015 Project blog / Registry |
||||
|
||||
|
Re: Thermostat Housing Neck Gasket
|
||||
|---|---|---|---|---|
|
Forum Ambassador
 
|
You can consider gasket sealant as optional as long as you use gasket paper rated for water or coolant and the facing metal surfaces are free of defects. If you are using a cork gasket I would certainly use a sealant.
Never bothered to measure gasket paper thickness, in fact never gave any thought to it. I'd guess something between 0.010 and 0.025" should give a satisfactory result.
Posted on: 2017/3/26 8:19
|
|||
|
||||
