Re: 1940 front seat cushion
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
On our '39, I noticed the same thing when we first got the car. When I looked at it more closely, I found 2 small 'vee-brackets' on the bottom front lip of the seat bottom. Try as I might, I could not get the seat pushed back far enough at the back, to get the brackets to engage in the metal seat frame. After fighting with it until the air turned blue, my wife came along and suggested I engage the brackets first with the back of the seat up in the air and then push the back down 'scraping' the rear edge over the seat back's front face. It really compresses the upholstery of the seat back and one has to be careful there are no sharp edges or staples on the back edge of the seat bottom, but, once in place, the seat was perfectly stable.
Not sure if the '40 has the same setup, but thought my 'ordeal' might help give you a place to start looking.
Posted on: 2018/2/5 19:52
|
|||
'If you think you can, or you think you can't - you're right!' Henry Ford.
1939 Packard Six, Model 1700 |
||||
|
Re: 1940 front seat cushion
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
I fight with my '40 sometimes, too, but when I take a little time, and push real hard, it goes in. However, I will now try 3Packs idea. Your wife is brilliant!!!
Posted on: 2018/2/5 19:59
|
|||
West Peterson
1930 Packard Speedster Eight Runabout (boattail) 1940 Packard 1808 w/Factory Air 1947 Chrysler Town and Country sedan 1970 Camaro RS https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?topic_id=4307&forum=10 http://aaca.org/ |
||||
|
Re: 1940 front seat cushion
|
||||
---|---|---|---|---|
Just can't stay away
![]() ![]() ![]() |
Thanks, I will look under the cushion to see if it is made the same way as the 39.
Posted on: 2018/2/5 22:24
|
|||
|
Re: 1940 front seat cushion
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
If you engage the brackets at the front of the seat cushion and place a sheet of cardboard between the seat back and the rear of the cushion it will slide into place easily.
Posted on: 2018/2/6 0:27
|
|||
|
Re: 1940 front seat cushion
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Good idea, Brian. Thanks.
Posted on: 2018/2/6 1:56
|
|||
'If you think you can, or you think you can't - you're right!' Henry Ford.
1939 Packard Six, Model 1700 |
||||
|
Re: 1940 front seat cushion
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
I didn't think there was any other way than opening both front doors, tilting the seat down in the front until it catches (you may have to do driver and passenger side separately), then pushing the the rear side down.
Posted on: 2018/2/6 9:45
|
|||
|
Re: 1940 front seat cushion
|
||||
---|---|---|---|---|
Just can't stay away
![]() ![]() ![]() |
Thanks, I was trying to make it fit like my 47 and 48. never noticed the bottom of the seat had those notches.
Posted on: 2018/2/6 11:36
|
|||
|
Re: 1940 front seat cushion
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Joe, I guess after having removed and reinstalled a plethora of back seats in cars over the years, where one USUALLY puts the back in and down first, and then they kind of notch down and lock, I presumed that was how the Packard front seat would/should work. SEEMED reasonable to me until I had tried it about 15 times and invented several new swear words; then when the suggestion was made to me to try it the other way it both worked AND made sense!!! LOL
Posted on: 2018/2/6 20:31
|
|||
'If you think you can, or you think you can't - you're right!' Henry Ford.
1939 Packard Six, Model 1700 |
||||
|
Re: 1940 front seat cushion
|
||||
---|---|---|---|---|
Just can't stay away
![]() ![]() ![]() |
Up-date. I have tried all the suggestions including the cardboard with my wife pushing down one side and me the other and it will not slide into place. I am now convinced when the car was restored in the 80' they put too much padding in the seat cushion and it just won't go down as described. The fellow I bought it from in 2008 told me he never could get it in and he had bought it from the restorer in Illinois around 1994. I will improvise.
Posted on: 2018/4/28 18:52
|
|||
|