Re: Differential for 23rd Series Deluxe 8 with Ultramatic
|
||||
---|---|---|---|---|
Forum Ambassador
|
I believe the standard axle ratio with Ultramatic was 3.54/1 which should be just fine for highway speeds.
Posted on: 2010/9/21 12:23
|
|||
|
Re: Differential for 23rd Series Deluxe 8 with Ultramatic
|
||||
---|---|---|---|---|
Forum Ambassador
|
I am curious as to any idea what did the damage and any other signs beforehand.
Packard diffs were very robust to start with and a heavy 1950 car with modest horsepower and Ultramatic is not particularly known for doing well at the dragstrip. Of course, I guess the previous owner's son (or daughter) could have wound it up and then dropped into low one time too many trying but would have thought something else would go first-------.
Posted on: 2010/9/21 12:44
|
|||
|
Re: Differential for 23rd Series Deluxe 8 with Ultramatic
|
||||
---|---|---|---|---|
Home away from home
|
Whats your goal for the car? You could easily swap the rear end with something newer while upgrading the brakes to disc at the same time.... Just a thought.
Posted on: 2010/9/21 12:51
|
|||
|
Re: Differential for 23rd Series Deluxe 8 with Ultramatic
|
||||
---|---|---|---|---|
Webmaster
|
The car could have been run with a dry diff for awhile in it's past and the damage is now starting to rear it's ugly head. Also if someone was in there previously they may have set up the gear spacing incorrectly.
Posted on: 2010/9/21 12:55
|
|||
-BigKev
1954 Packard Clipper Deluxe Touring Sedan -> Registry | Project Blog 1937 Packard 115-C Convertible Coupe -> Registry | Project Blog |
||||
|
Re: Differential for 23rd Series Deluxe 8 with Ultramatic
|
||||
---|---|---|---|---|
Home away from home
|
Now I know this car used a 3.9 ratio. 39 tooth ring gear and 10 tooth pinion. Does anyone have a third member for sale?
Posted on: 2010/9/21 14:11
|
|||
Fred Puhn
|
||||
|
Re: Differential for 23rd Series Deluxe 8 with Ultramatic
|
||||
---|---|---|---|---|
Forum Ambassador
|
Just this week a friend of mine picked up a chassis from a 48 or 49...if you can't find it locally, should be easy to put a center section in a milk crate and call UPS or fedex ground. Russell Chandler 903-736-0339 is a professional mechanic (Packard and otherwise) and owns several 22/23rd series cars.
Posted on: 2010/9/21 14:41
|
|||
|
Re: Differential for 23rd Series Deluxe 8 with Ultramatic
|
||||
---|---|---|---|---|
Home away from home
|
Thanks for the tip. I will try locally first to save shipping and time, but will go further away if I need to.
Posted on: 2010/9/21 15:16
|
|||
Fred Puhn
|
||||
|