Re: 1956 Packard Clippers Wiper Control button Sizzles
|
||||
---|---|---|---|---|
Home away from home
|
There's 2 lines going to that switch. One is missing on yours. Also they have to go a certain way where if you look at the switch, the barb that is exposed to air goes to the barb on the front of the motor. The barb that is always under the sliding switch goes to the barb on the top of the motor.
I think you need to switch where that line is connected then add the other. It's shown in the service manuals. I screenshotted and put them in this post along with tubing sizes etc. packardinfo.com/xoops/html/modules/newbb ... SC&topic_id=28297&forum=3&move=next For the washer, make sure it's tubed up correctly as shown. But the unit itself probably needs to be rebuilt too. packardinfo.com/xoops/html/modules/archi ... ntent.php?op=&catID=8&ContentID=315
Posted on: Today 7:59
|
|||
1955 400 | Registry | Project Blog
1955 Clipper Deluxe | Registry | Project Blog 1955 Clipper Super Panama | Registry |
||||
|